rse
Responses from rse
| Citation 7.1 Amp how to replace binding post Yes, I believe the post is soldered in place. You should be able to wick out the solder carefully and just resolder a new one in place. You might need a heavy duty soldering iron or a soldering gun which will definelty do the trick.A local repair ... | |
| Should I Bi-Wire or Use Jumpers? If your system sounds a little light weight, bi-wiring usually will help to get a fuller bodied sound. I also have found jumpers to surfice, but try connecting the main speakers wires to both sets and listen to which may sound better ( I connect t... | |
| speakers that rock Klipsch RF7 will play Rock loud with dynamics and punch, plus you can find them for about $1K or so. | |
| Quad 988 how big of room do you need? I have the newer 2805 not the 988...but they should be pretty similiar, I'm in San Diego, if that's not too far, you're welcome to stop by and take a listen (email me direct).When I first set up the 2805's I put them where all my other speakers ha... | |
| Citation 7.1 - question to fellow owners I have noticed similiar results. What I did was make up new internal jumper cables from amp modules (4) to the rear speaker connection board.This did the trick by eliminating the slight edge in the highs sometime heard like you mentioned. | |
| Recommend a forward speaker Instead of changing your speakers (expensive) you might audition an Arcam CD player (CD33 or CD36)they tend to be more immediate sounding (a little more presence) than most of the CD players I have tried without sounding bright.Eagle amps also len... |