relsteamboat
Responses from relsteamboat
| humming interconnects does open shield mean "no shield" -- so its picking up some interference from the sub or amp?thanks for trying to help.I did notice the hum was lessened when I unplugged the sub.Again, none of this was an issue with the cheaper audioquest intercon... | |
| humming interconnects hi -- I was using the interconnects with my Pro-Ject turntable. I thought it was a ground issue, but its the interconnect. Once I swapped the cable the hum went away. | |
| tone arm drifts towards the outside when lowering Problem resolved --I cleaned the lift -- it was dusty/dirty.My mistake on the set up -- I had the anti skate set up prior to adjusting the VTF. Those two simple changes did the trick.Thanks again everyone. | |
| tone arm drifts towards the outside when lowering thanks everyone.I removed the anti skate and the problem went away. not sure if I can hear a difference or any issues with tracking.table is level and I triple checked the VTF -- all good.will try cleaning the liftthe table is the pro-ject RM 10 w... |