ncampbell
Responses from ncampbell
| Eminent Technology ET-2 Tonearm Owners Please see the picture below.At the top left is the original Linn tonearm mounting point. This is where I first mounted the ET tonearm.The new ET arm mounting point is called out. I prefer this mount point because it is between the suspension poin... | |
| Eminent Technology ET-2 Tonearm Owners Mounting the tonearm via the current pivot hole does not work for a couple of reasons:a) the ET bearing spindle is not sufficiently long to allow the tonearm / cartridge to reach the outer diameter of the platter. The mount point, by necessity, ha... | |
| Eminent Technology ET-2 Tonearm Owners Thanks for the great pointers. I am going to start by mounting the tonearm using the current pivot hole with the fender washer suggestion. At that point I will measure suspension deflection to see if it is factor and if so try some different tonea... | |
| Eminent Technology ET-2 Tonearm Owners In the process of setting up a LP12 for a ET2.5 tonearm. Is the aluminum mounting base a noticeable improvement? |