miles765
Responses from miles765
Gustard X30 disappointment I did not contact gustard, I contacted the reseller, the unit is on it's way back, will see what happens. | |
Gustard X30 disappointment I did, it was very nice, detailed without being bright, and not even close to being broken in. | |
Gustard X30 disappointment Swapped only the ends on the dac, that proves the cable is good as well as the rest of the chain. | |
Gustard X30 disappointment I also have a R26 and am quite fond of it, that's one of the reasons I went for the 30, I swapped the cables and the problem transferred to the left, it is the unit. currently waiting to hear back from the seller. | |
Gustard X30 disappointment It had been idle about 4 hours, tried playing with roon, then with coax same no right channel, rebooted same, turned off for a few hours and worked again. today off all day till afternoon, and no right channel again | |
Clearaudio Performance DC issue That is too bad, I don't think I would ever get rid of my DC, but mine has the magnify arm. | |
Clearaudio Performance DC issue Only time I have read about something like this happening is with a verify or clarify magnetic tone arm. If you are willing to try you could buy a riverstone tracking force gauge just to see what the tracking force is. that could give you a better... | |
Is there a ROON sound? I just got a Gustard R26 and am trying out roon and bubbleupnp, roon server is on a dedicated pc with the installed settings. I swear bubble sounds better on both stored wav's and streaming from tidal. roon does not sound muffled or muted in an... | |
Vintage Japanese DD Consult and Suggestions Please You can get a rebuilt DP80 off of yahoo auction japan through a service like buyee or others, just be aware that shipping costs are high. a dk-110 or 300 can also be found there. a dp75 motor unit could be an option, some say there is no sonic d... | |
AR XA turntable needs new cartridge... I have tried a few carts a nag mp110, grado, v15 2 and 3, but right now a n44g with a jico nude stylus @ 1 gram, the best were the v15 3 and the n44. IMHO higher compliance works better w/o antiskate | |
Clearaudio Clarify Help Needed! you need a record height vtf gauge/scale to correctly set the vtf the clearaudio seesaw or weight watcher scale i use a riverstone audio scale |