mchu168
Responses from mchu168
| biwire trick Forgot to mention that all 4 runs are identical in length and type. | |
| biwire trick I run 2 completely separate cables per speaker for the highs and mids (total of 4 runs of cable for L+R). I thought running the highs and mids in separate cables was part of the benefit of biwiring. Of course the two runs are connected at the amp ... | |
| Faint click from speakers Well, I think I managed to isolate the problem to one amplifier, the left monoblock. After the amps are warmed up, I can hear the clicking in the left speaker, even when the left amp is in standby mode. Interestingly, when the right amplifier is o... | |
| Faint click from speakers These are some great suggestions. It's been so hectic with the move and at work that I haven't had time to do a lot of troubleshooting. Tricky part is that sometimes it takes hours for the clicking to start up.I'm hoping that the Quintet is culpri... | |
| Audio Research Preamp with Cary Amp? Ok then, it's unanimous. I think I'll go for the Cary pre.Since we're on the subject, what would you guys recommend for 6SN7's? Based on what I've read are shortcomings of the 98, I would be looking for more extended highs and tighter, more extend... | |
| Audio Research Preamp with Cary Amp? Is the F1 only available from Upscale Audio and what's the ballpark cost for swapping out the tubes that make a difference? Afraid of opening up a can of worms. | |
| Amplier Stand for Cary 805 Thanks for all the responses. I'll have to check out the Synposiums. The FE stuff looks great but way over my budget! |