mac2019
Responses from mac2019
| Rega Ania Cantilever Bent? Just switched the cartridge wires (right<--> left) . and problem channel is switched!. I think this confirmed the problem is caused by the cartridge(off-center cantilever). Any suggestion? Thanks | |
| Rega Ania Cantilever Bent? One correction. It is right channel(red RCA connection) weaker than left channel. right channel is actually from the outer side of groove based on the discussion I read online. it may be consistent with the fact that cantilever is bent inward towa... | |
| Rega Ania Cantilever Bent? Some said if antiskate is too much, it may cause the “off center”! Cantilever . Currently, it is set as 1.75 as Rega suggested. Not sure if I should reduce it further? Reversed? You mean the connections on cartridge? Thanks | |
| Rega Ania Cantilever Bent? One more thought, cantilever is connected to the cartridge body through a suspension, which allows cantilever move around freely to pass the motion to coil.(MC). for some reason, the cartridge is NOT perfectly aligned, the cantilever will be pushe... | |
| Rega Ania Cantilever Bent? thanks. Based on the picture, the degree of off center should be more than 5 degree, (which is ~ 0.2mm arc for a 10mm radius) and should not be visible. The cable connection looks fine, I will double check the connection on cartridge. I remember... | |
| Rega Ania Cantilever Bent? Please check this link . Thanks https://photos.app.goo.gl/5vYdytbB5PngnJQ97https://photos.app.goo.gl/R2ttHEG4zsnQ9sjt6 |