lsoasey
Responses from lsoasey
| Need DCX2496 Presets for Emerald Physics CS2 @rodman99999 Thanks for all of your input! I’ll PM you on the side.I’m using a recently acquired Dayton Audio EMM-6 with a calibration file downloaded from their website. It was fairly easy to get the cal filed loaded up in REW.I did not pay for t... | |
| Need DCX2496 Presets for Emerald Physics CS2 I've got a miniDSP 2x4 HD now and have been playing with a little for the CS2s. I've managed to correct the mid/high from about 200 Hz up. (Dipole peak and some other minor issues...) The low end (200 Hz and down) looks crazy to me. I assume the... | |
| Need DCX2496 Presets for Emerald Physics CS2 @rodman99999 - Thanks for the pointers. This really helps. I'll start exploring these LSP options.In the meantime, I've been reading up on what it means to properly EQ the CS2s. This is looking a bit more involved than I originally realized, but I... | |
| Need DCX2496 Presets for Emerald Physics CS2 rodman99999 - I’ve decided to give the Minidsp 2x4HD a try. Do you happen to remember what kind of upgraded power supply your friend used? | |
| Need DCX2496 Presets for Emerald Physics CS2 Update -- I just got off the phone with Water over at Underwood. Not surprisingly, the CS2 and its original DCX2496 are not supported at all anymore. He mentioned some kind of new amp/dsp product in the works, but it's not available yet. In the me... | |
| Need DCX2496 Presets for Emerald Physics CS2 rodman99999 -- That's an interesting idea. Something like this did cross my mind since I was already getting frustrated with the DCX2496's poor analog output stage and its 24-bit/96 kHz limit. (I have some digital sources which exceed this bitrate... |