lez
Responses from lez
Esoteric D70 direct to amp? I do this and I prefer the volume control to that of Wadia. BTW IMHO in this regard less is more, unless you have a SOTA preamp.FYI the rest of my system where I use the D70 is as follows:Accuphase DP80 transportHarmonic Technology Photon digital ... | |
EMM LABS CDSD/DCC2 Tweaks Neil,In my opinion, the first thing one needs to do after buying the EMM Labs combo is to find a great power cord and conditioner. The stock Kimbers are better than a regular PC cord but simply not good enough.I had fantastic results with PS Audio... | |
Ear Master One by Accoustic Reality Rnik,I currently use Nuforce Ref9 amps. Previously I had expreience with the Ear 501 MKII and Mark Levinson 331/333, Pass Labs X250/X350 traditional amplifiers and some other more. My speakers are Thiel CS6, which represent a pretty difficult load... | |
Power for Thiel 7.2 Kowkow,I have been listening to CS6 speakers and have a friend who has a pair of CS7.2. He bought my Pass X350 and when he bought the CS7.2 he tried to drive it with them, while I used an X250 with the CS6. None of the amps worked well, although t... | |
Help - Mark Levinson Owners Hi,Your system is awsome, however the front end power cords are the most important cables in a system IMO and I think you really need to upgrade them. I have ML gear too although not from the refrerence series (390S/39, 331/333) and the best cable... | |
lower priced power cords for emm labs CDSD/DCC2 ? I use EPS 2 Signatures and they are very good power cords. However, in the $500 league I found the Siltech SPX 30 Classic G5 to be a good all rounder performer. It is a bit thinner, has less bass and it is less dynamic than the EPS 2S, but it has ... | |
A big thanks to Thiel I can only say the same guys. Recently my daughter pushed the dust covers of my CS6 speakers very badly. I called Shari on Friday and on Tuesday I received the new covers by FedEx. On Wednesday the covers were changed and on Thursday I listened to... | |
Cables for Thiel CS6 Marco,Thiel speakers are very power hungry. The sensitivity is given as 86 dB but for 2.83V/1m, (2,83 is the square root of 8, normally manufacturers use this if the speaker's impedance is 8 Ohms.). Because of the fact that the CS6 has a 4 Ohm imp... | |
Cables for Thiel CS6 I have been listening to my CS6 speaker for about a year and I tested it with the cables as follows:Harmonic Technology Magic Tweeter/Woofer and Pro 9Transparent Reference wXLGryphon Guideline PSC GoldSiltech RibbonSiltech LS 288 GoldKimber KS 303... |