larry_hb
Responses from larry_hb
| amp to compliment NAD 1155 I am running a Hafler DH-200 I picked up on eBay for less than $200, then added a few mods that really made it sound good. I replaced the input electrolytic capacitor with a Solen polypropyline 10uf, and added 1uf polypropyline bypass caps to the ... | |
| Recommended Component Cable Um, Ezmeralda11, according to Belden, the 1505A has a foam PE dielectric. If you want teflon, you need the 1506A, which is the plenum version of the 1505A. | |
| RCA to BNC adapters Canare rates their 75 ohm RCA up to 200MHz, whiile their 75 ohm BNC's are good up to 2Ghz. At the lower frequencies, the RCA's are a close enough match, and are well inside the frequency requirements of both SP/DIF and video signals. | |
| Why do digital cables sound different? Impeadance matching is the most important factor.This is going to get a little tekkie, so hang on.It does not matter if the signal is analog or digital, the higher the frequency, the more important impeadance matching becomes. At RF, when a signal... |