koala
Responses from koala
| Long headshell required Thanks again for everyone's advice Yes, it's a Mk 2. The calibration disc does not show the algorithm unfortunately, I will try mounting the arm again and see if I can achieve the correct P2S distance. If not, it will be time to get a differen... | |
| Long headshell required Thanks again for all of your input and suggestions. To explain the scenario - EPA100 tonearm has a large/wide mounting base and it's going onto a plinth where the arm board position doesn't allow it to get close enough to the centre (unless I cu... | |
| Long headshell required Thanks for all of your suggestions. Since I'm not prepared to cut out the plinth, it's the best way to improve the P2S distance. It wont be perfect but it will be close. Does anyone know of a long SME headshell? | |
| Long headshell required Because of the base of the tonearm, EPA100, being so large it is difficult to move it closer to the platter and hence the P2S distance is short. Having a longer headshell will rectify this, rather than dig into the plinth. Appreciate your sugge... |