jonny1080
Responses from jonny1080
| Modifying Philharmonic 3 crossovers Thanks your advice Erik, I will soon be purchasing a multi-meter to measure the DC resistance. | |
| Modifying Philharmonic 3 crossovers Thanks for the advice, I do actually have a few iron core inductors, so I may change them out and see what happens. | |
| Modifying Philharmonic 3 crossovers So I just soldered all the Clarity CMRs and CSA capacitor and the Phil 3 speaker sounds fantastic! The speakers sound a lot more 3 dimensional and much more atmospheric and organic. Thank you everyone for the advice and especially to Eric! This wo... | |
| Modifying Philharmonic 3 crossovers Hi, thanks guys for your responses. I'm seeing varying opinions regarding bypassing. Are there down sides to bypassing? | |
| Modifying Philharmonic 3 crossovers Thanks Erik for your help so far in choosing capacitor. Right now I'm getting all the new Clarity CMRs setup in the crossover and I was wondering about resistors. I looked at Duelund cast resistors because they're not as terribly expensive as thei... | |
| Modifying Philharmonic 3 crossovers Hi Erik, I already purchased an 100uf clarity CSA capacitor to replace a Solen fast capacitor of the same farad rating for the bass. I just now ordered two 20uf clarity CMR capacitors to replace two clarity PX capacitors of the same rating for the... | |
| Modifying Philharmonic 3 crossovers That article was very informative Erik, thanks! Okay, so if the caps are in serial then stick with the same caps, got it. How about one type of caps for the tweeter and one type for midrange? | |
| Modifying Philharmonic 3 crossovers Based on my research, I don't believe I have any electrolytic caps in the crossover, just solen 400v PB series Polypropylene fast caps and for the mids & highs there are clarity PX series caps.I'm not sure what you mean by "in pass through".Ha... | |
| Modifying Philharmonic 3 crossovers Wow, Thanks for finding the CMR 20uF model Erik, You're a life saver! I'll definitely make a note of the advice regarding the capacitor. I have a few more questions. I heard the CSA caps from claritycap sounds phenominal with bass. Would anyone sa... | |
| Modifying Philharmonic 3 crossovers Thank you very much for the insight timlub. Also, just curious about the uf so for example if two caps have the same uf rating then it should be ok to interchange between them without messing up the crossover, right? | |
| Modifying Philharmonic 3 crossovers Thanks for your advice dasign! I was also wondering about the various voltages of the claritycap capasitors. Does the voltage make a difference? |