jaycee
Responses from jaycee
| 2 systems one set of speakers????? You can (and should) use a speaker switch in this situation. Connecting your separate amp and the receiver to the same speakers would connect the outputs of the two amps together, and result in damage to one or both units. Quality speaker switches... | |
| My CD drawer won't open please help ? I fixed a similar problem by cleaning the drive belt with a non-slip fluid for rubber parts, like belts and idler wheels, purchased at Radio Shack (isopropyl might work if you find the stuff's unavailable). The faulty player used a rubber belt to ... | |
| AA DTI Pro32 Manual I don't have a scanner (I should!), but will mail a photocopy if you email your mailing address.For now, be advised that Audio Alchemy suggests you insert the 1/8" mini-plug into the unit BEFORE connecting the power supply to A/C. (I imagine to sa... | |
| Recommend me a good psychologist When I described these very same symptoms to my therapist, I was informed that I suffered from a skewed perspective, and a consuming obsession with my equipment. This results in a perpetual sense of dissatisfaction with "the medium", which in turn... | |
| Need help with DTI-PRO 32 Sorry about my "chart" - it looked pretty good when submitted, but I guess the AudioGone word processor thought I was using up too much space with spaces. The sequences are still correct, but sadly, out of alignment. | |
| Need help with DTI-PRO 32 Here's the decoding chart as listed in the manual: -------------------------------------------------- | HDCD | 16 | 18 | 20 | 22 | 24 | None | -------------------------------------------------- | off | off | off | off | on | on | on | | off | off ... | |
| Tuning speaker / room response? I think I may have missed the thrust of this discussion, and I'm a month late to boot, but here's some related info:It looks as though the analog RS SPL meter is capable of providing data sufficiently accurate to be useful in addressing speaker/ro... | |
| Help with the MC-1 Part 2 Please Read There's a good chance the switches on the back of the Proceed amp would not allow you to switch between sources, but serve to short pins 1 and 3 (assuming pin 2 hot) so as to prevent noise being picked up on the unused side of the balanced input w... |