jacobatrel
Responses from jacobatrel
| Room Correction: Should I disconnect my REL Subwoofers before running room correction? Hello puffbojie, If the R528 subwoofers are connected via RCA to the sub outs on the C-658 streamer then you can leave them connected while the room correction program runs. If they are connected using the high level input to the speaker output t... | |
| 2 subwoofers to connect to Naim nova Hello romney80,Naim amplifiers, such as the Nova, feature a unique output impedance that can cause performance issues when connecting standard speaker wire directly to it’s output terminals. REL has two solutions for connecting High Level to the N... | |
| 2 subwoofers to connect to Naim nova Hi romney80,You can definitely connect two subwoofers to the Uniti Nova, and REL’s recommended approach for this is to use the High Level input on the subwoofers. This input uses a specialty cable that is provided with each subwoofer and connects ... | |
| Amp binding posts for bare speaker wires As others have mentioned you shouldn't have any performance issues from the subwoofer or your loudspeakers if both the high level wires and your speaker wire are connected to the same terminals with bare wire termination. As long as the wires are ... | |
| What's the difference between a Rel t/9 & T/9i? At least for REL subwoofers, the high level input is designed with a significantly high impedance so it will not place any current load on the amplifier. You do need to be careful when connecting the high level cable to different amplifier types, ... | |
| What's the difference between a Rel t/9 & T/9i? Hi db, both the T/9 and the T/9i can be connected to the Ayre A7e using the High Level input, though since the A7e is a balanced amplifier you will want to be careful to not connect the black wire of the REL’s high level cable to one of the nega... | |
| REL subwoofer using only red cable not yellow per REL technical dept It isn't a 100% certainty that hum will occur when connecting a single subwoofer high level to two monoblocks, though in our experience it is pretty common, and when it does occur it can be near-impossible to eliminate. | |
| REL subwoofer using only red cable not yellow per REL technical dept Ground hum will occur when connecting a single subwoofer to two monoblocks, and this hum can be extremely difficult if not impossible to eliminate. If you are only able to support a single subwoofer in your system at this time you can connect it t... | |
| Help - Subwoofer Crossover when both REL T/5i & Marantz AV7702mkII have Crossover settings The crossover control on the back of the T/5i only affects the High Level and Low Level inputs, and does not alter the signal coming in through the .1/LFE input since the crossover for this channel is set by your AV processor. For home theater app... |