hedkase
Responses from hedkase
| New AES3/USB interface? @designsfx No, worries. I appreciate the attempt! BTW -- Mine was taken from the Quick Start Guide I downloaded from their website today. Might want to check that one out and compare. | |
| New AES3/USB interface? @designsfx After looking at the Mac specific instructions, I noticed this. Looks like everything displayed on the front is normal and expected. I may try a hi-end USB cable and see if that changes anything. Will also most likely get that Matrix... | |
| New AES3/USB interface? @designsfx I've tried just about every configuration available. This appears to be the only setting that gives me audio. Also, I'm unable to have nothing selected for the Reference column and at no point am I able to change anything in the Cloc... | |
| New AES3/USB interface? @designsfx I've tried all the settings. The only mode I get audio from is INTERN/RE-CLK. I unfortunately don't know much about this unit. It was a means to use these monitors with my desktop in my office. MC-3 settings | |
| New AES3/USB interface? @designsfx My Mac does see the MC-3. Roon shows the MC-3 as the endpoint in the system. It is a very odd issue and its driving me nuts ;) I guess I can try that Matrix Audio X-SPDIF 2 and see if the change in hardware changes anything. | |
| New AES3/USB interface? @designsfx Ah, I assumed you meant sample rate change from track to track. There is no other hardware other than the MacStudio, Mutec MC-3 and the PMC monitors. I did just hear back from Mutec. They suggested maybe the USB cable wasn't allowing ... | |
| New AES3/USB interface? @rms456 any idea why the signal would be lost? This appears to occur randomly. Sometimes with no music playing, other times in the middle of a track. Sometimes it’ll not happen for a week, or it’ll happen several times a day. | |
| New AES3/USB interface? After looking at the recommendations I've realized both are too large for my desktop studio setup. I may give this Matrix Audio unit a go. Has anyone heard anything good/bad? X-SPDIF 2 | |
| New AES3/USB interface? @designsfx yah, USB from Mac to Mutec is how I've got it. The reset is strange. It'll start with one monitor then move to another, then the last. With each one appearing to power down and back on. Like I said, these PMC units have been replaced... | |
| New AES3/USB interface? Only one AES for me. The PMC speakers run in a "daisy chain" configuration. Thanks for the recommendation. I'll check out those other brands. I brought this issue up with Mutec directly but they appeared to be less than interested in investigatin... |