fjferal
Responses from fjferal
| Thread source for Loricraft RCM's;also seeking f/b I don't check in here much anymore so didn't see this post until now. It's not real clear to me what the problem is. Do you mean it won't swing out? Do you mean it won't stop moving out? The mechanism is fairly simple and unless the motor unit is ... | |
| Thread source for Loricraft RCM's;also seeking f/b There was another reason why I didn't go direct for a small amount of thread. As I mentioned in my initial post the Gudebrod thread is becoming hard to find (for whatever reason). I put a lot of time and effort into trying to source thread locally... | |
| Thread source for Loricraft RCM's;also seeking f/b peterayer 12/14/11 If you are talking about the 2 hoses outside the catch bottle, I guess it would make a theoretical difference. That extra inch of tubing leaves you with a bit of wiggle room when it comes to movement in the arm or removing the l... | |
| Thread source for Loricraft RCM's;also seeking f/b dhcod 12/13/11 That's great that you had an easy time getting thread. It was largely cost that led me elsewhere and to posting here about it. The last time I looked, Smart wanted $10 for 100 yd. of thread. Then I would have to have it shipped to t... | |
| Thread source for Loricraft RCM's;also seeking f/b Peterayer 12/11/11 re return of unit - I did consider it. Loricraft is clearly a cottage industry. That's not necessarily a bad thing but the cottage is 5,000 miles away. Since they were initially quite helpful I thought I would have a go myself. ... | |
| Thread source for Loricraft RCM's;also seeking f/b Canam (12/12) I usually do at least 1 pass in each direction. I always start the arm at the edge of the label and go 'uphill' to the outer edge of the LP both CW & CCW. Al | |
| Thread source for Loricraft RCM's;also seeking f/b Warning - this is going to be a long post.When the RCM arrived I unpacked it and set it up with no problems. First impressions after a few washings were that it was quiet and very effective, leaving no static buildup on washed LP's. After a few hu... |