eaudionet
Responses from eaudionet
| I need help with DTS Yes, you will need a DVD player, which can read the DTS signals and pass the signals to your Denon receiver. The transmission is through digital cable and then you can get the signals processed by Denon. Good luck. | |
| Feedback on these two cables I want to audition. The Hologram is very dynamic and open. | |
| Players, transports, DACs ?? The CD player comes with the build-in DAC while the CD transport only works on the digital signal pickup.Good signal pickup is crucial to everything, because garbage in and garbage out. So it is important to have good reading device. The DAC is ma... | |
| Mixing Silver and Copper cables -- Good or bad?? There is no absolute on determining which type of cables is superior. It depends on the quality of the products and the system matching. The Copper cable can sound a bit smoother and warmer in general, while the Silver cable usually sounds faster ... | |
| What is the story with 24 bit masters 24/96 . CDs can only store 16/44 because of the PCM format. If you want to test your DAC at higher hz, you can play some DVDs and the DAC will show more than 44khz. | |
| Best Passive Pre-amp with remote?? Give the Van den Hul array P-1 a listen. It looks simple and elegant. The sound is accurate, musical with no coloration, a great solid state passive preamp w/remote. For good tube preamp, Art Audio no-feedback preamps are excellent choices. | |
| speaker cables with a warm sound The truth-link is a good choice. You should also try the HT Pro-11 or Pro-9. The other alternative is the NBS classic series. Good luck. | |
| B W 802 Nautilus on hardwood floor...need help Use isolation bearings such as Aurios. This will provide one of the best isolations to your speakers. One Aurio can hold several hundred pounds so your speakers are not a problem. | |
| COAX VS OPTICAL CABLES Optical cables sound better with longer length, such as 10 meter. | |
| Floor speakers on tile floors? On the tile floor is not a problem. The easier to resolve the problem is to get some spike bases (shoes) for the spikes. In this way, the spikes won't be moved by the vibration and you can even get better resolution this way. | |
| Burned CDs can sound better than the original? This is just an experience sharing. So far with three brands of CD recorders, we have not yet experienced better sound from the CD-Rs than the original recording CDs. One of the reasons that we guess is the signal pick up rate from the CD-Rs, whic... | |
| Integrating sub with main speakers First, I believe the reason that you set up the crossover to 35Hz is because the Maggie can go deep down to 35Hz. You may want to check the error rate. If it is -3dB or more, you can set up the crossover to 40Hz to prevent the LF distortion by the... | |
| Has anybody heard the FIM power cords? FYI, eAudioNet.com is providing the home auditioning of the FIM cables. If you have any questions, you are very welcome to contact Wen-Li at (518)782-5489. We also have lots of high-end cables for your selection and are pleased to answer all kinds... |