agharion
Responses from agharion
| Tube Phonostage Causing Rumble and Noises Thanks everyone for your feedback and advices. I think I will take the easy way out, ie play records without the sub. Thanks a million. | |
| Tube Phonostage Causing Rumble and Noises Hi mulveling, thanks. I will certainly look into the Hagerman. If I can’t resolve the problem, getting the Hagerman at $1289 sounds like a good option. I was interested in the Pass Labs XP-27 but the price is way up there. From my experience wit... | |
| Tube Phonostage Causing Rumble and Noises Hi dmguragno, thanks. I just moved the phono power cord to another receptacle. I had an experience that a defective receptacle caused my power amp to overheat. | |
| Tube Phonostage Causing Rumble and Noises Hi Noromace, not in use means not playing and still connected to the select source. my turntable is far away from a corner and the sub is at least 5 ft from the turntable. At this point, I probably should try the rumble filter. I will give KAB a... | |
| Tube Phonostage Causing Rumble and Noises Thanks, jetter. If I can’t resolve the issue, that’s the only option. Luckily Aesthetix makes good phono. It is just as enjoyable with or without a subwoofer. To me, the primary issue is not whether I use the sub or not. I am deeply concerned tha... | |
| Tube Phonostage Causing Rumble and Noises Thanks again misstl. I get the rumble when the turntable is not in use. my turntable is about 6 or 7 years old. Lightly used because I listen to digital most of the time. | |
| Tube Phonostage Causing Rumble and Noises Thanks misstl. Jim White did mention RIAA curve boost. Jim also said it was impossible to eliminate the rumble to zero although I was assured the rumble was eliminated before I paid for the service. I don’t mind a little rumble but no one can list... | |
| Tube Phonostage Causing Rumble and Noises Since the problem persists after tube swapping, I am beginning to suspect there are defective parts in the unit. when lightning strikes twice, it cannot be just coincidence. Before I acquired the I/O, I got a Rhea Signature. The minute I turned i... | |
| Tube Phonostage Causing Rumble and Noises Thanks for the feedback. I asked Jim White about the rumble filter and he said it was a bad idea. I set the sub volume at around -20 dB. Crossing over at 35 Hz for the Apogee and 85 for the LS3/5 A. Definitely not loud. No issue with the rumble/n... |