adamsrpm
Responses from adamsrpm
| Transparent Audio is anything but Transparent One reason I purchase from well known brands is because I plan to resell it someday. Who would buy a Mercedes if you knew you couldn't resell because the manufacturer won't sell you parts or a dealer won't repair it because you didn't purchase the... | |
| REL Hum. Stumped I had the same experience with REL high level connections, whether a single sub or two subs. The hum was only apparent when no music was being, but still annoying. I then purchased a KEF KC62 and connected left and right channels from my preamp o... | |
| LS50 vs R11/7/5 Meta I recently purchased a pair of used LS50 Metas at $900 including shipping. As stated previously, they are now on sale everywhere for $999 with free shipping. I have a small room and listen at moderate levels most of the time. I purchased the LS50 ... | |
| My Impossible hum issue. The tonearm is a Technics with removable headshell. | |
| My Impossible hum issue. The problem was solved by changing the phono cable, which was a left/right channel and ground all within one assembly, with the stock cable and ground wire that came with the turntable. The stock cable eliminated the hum. I had tried cheater plugs... | |
| My Impossible hum issue. In my case, the hum increased with a higher gain setting. On my phono preamp the choices are 40, 50 and 60. The MC cartridge that I have has a lower output than my MM, thus needing more gain. When I would switch the gain, the hum increased | |
| My Impossible hum issue. Yes, I did connect the turntable directly to the Parasound P 6 with the same result. When going back to the turntable's stock cables, the hum stopped. Now I need to find some quality phono cables that don't cause a hum Any suggestions for a phono... | |
| My Impossible hum issue. I dug-out the cheap cables that came with the turntable--including the power cable. Replaced the Pangea Audio phono cable and power cable. NO MORE HUM!! I can't beleive it. Even at the highest gain setting--no hum. The phono cartridge is a Zu/DL-... | |
| My Impossible hum issue. I have tried movig the ground wires using one from the turntable to both preamps and just one or the other preamp or no ground at all. I have been using an upgraded interconnect cable (Pangea turntable cables with integrated ground wire) and not t... | |
| Balanced Inputs I play cds 75% of the time. Parasound states a 6db gain using the balanced interconnect Don't know about the transformers. | |
| Balanced Inputs I don't think any of my gear is truely balanced. I have a modest system: Technics SL-100C turntable Ortofon 2M Black cartridge Denafrips Ares II DAC Audiolabs 6000CDT transport Parasound Zphono XRM Parasound Halo P6 preamp Parasound Halo A... | |
| Balanced Inputs Thanks. I was leaning that way. |