CD player vibration control ..................

cut up flip flops (I ain't lying)

Rigid objects do not provide any vibration isolation or damping. They merely change the natural frequency of the system they are used in and it could still fall within the audio band (usually does). Look at some *real* isolators online, they usually employ springs or elastomers.

I've been an isolation freak for about 15 years. Started with solid oak planking and then maple cutting boards before Peter Bizlewicz got one of his early proto's into my system. Since then, I've had the chance to listen to most of the usual suspects in my system. I remain an ardent employer of Symposium - I have Ultras under my components and my speakers; Roller Blocks under my AA and my BAT amp. Now I'm waiting for Symposium to bring their new Series 3 to market. This will be akin to another component upgrade but I have heard the prototypes under Wavac and Jadis amplifiers - not to mention an Audiomodded 777, and the results are extraordinary. These are expensive products and, unfortunately, there are few US dealers - most of whom neither know the products, much less how to effectively demo them - so your best best is to travel to RMAF or CES to hear for yourself.

All of my cdps - Meridian 506.24, 508.24 and 588, and my AA Cap Mk II - have greatly benefited from isolation and damping.

Rotarius-
I agree that rigid materials do not provide damping. Rigid materials will transmit vibrations and at best change the frequency of the transmitted vibrations.

Flip flops are typically made of "elastomeric" materials
and are CHEAP.

Gosthouse, the real trick is to determine how much your isolator has to compress for a particular weight it carries and you have to prevent horizontal front-to-back or side-to-side movement. An enclosed air bladder may provide real amd measurable vibration control. All I can say to everyone on here is make sure the seller supplies you with measured data to substantiate the claims as it can be done easily and without a lot of expense.