Will a Wattgate 20A IEC female end fit AR VS115?

Thanks for the input, Chashas. I may just go ahead and order a Wattgate, as it is the only one of the high end connectors that looks like there may be clearance. If there is sufficient clearance, it will be by a gnats ass. I can return it if it doesn't fit. At $97.00 it may be a few weeks before I do so. In the meantime, if anyone has any info on a viable 20A connector, please shoot it my way.

Chashas, tell your friend to check out Shunyata.
Their 20A IEC connectors are like the AR ends in conformation - plug body is small and square. They also make a 20A to 15A adapter, allowing use of a 15A cord, but also serving the purpose of moving the plug body out from the back plate of the amp, leaving room for the fuse holder end cap.

After looking at the 20A wattgate I'm using with my Ref 3 and the pic linked above, I'm not sure there is enough clearance. Check out the wattage's specs at

http://www.wattgate.com/products/350ihcag/

The outside diameter on my 20A extends approximately .3 inches above the width of the insertive part.

Hey Alexanderj, thanks for the input. Do you mean the immediate shoulder that is somewhat squared off that surrounds the insertive portion of the plug protrudes above the insertive portion by .3 inch? In other words, this is the clearance that would be needed to insert under the fuse holder? Thanks Jea48 for supplying the picture of the back of the amp for reference in your first post. I admit I am computer challenged in this regard.

One more question Alexanderj, what is the length of the shoulder, measured from plug body to drop off of the shoulder (where it drops off to the insertive portion)?

Thanks!