Gamut M250 MK3


I got a pair of Gamut M250 Mk3 mono-blocks that went in place of a D200 mk3. They were installed yesterday, and worked fine for a day. This morning I turned on the amps to warm up. A bit later I went back to the listening room and heard a very loud hum. First I looked out the window for a garbage truck; then put my ears against the speakers. Nothing there. It was coming from the amps. Power-cycle of both amps confirmed that both were making that noise, though one was louder than the other. About 10 minutes later the noise was gone. I have a feeling that this might be one of those intermittent problems that's difficult to track down, but I do want to get to the bottom of it while they're in warranty. To other owners of the M250, have you ever experience such a problem?
ping2357
Hi Nico_g. Nothing wrong with PASS, but in my system, I just love the Gamut sound. I am using tube preamp with the Gamut. The PASS, even with paired with PASS pre-amp, sounded like ordinary electronics. Yes, the M250 is better than the D200 in all areas. The Strads have 2 12" woofers which need more power. I don't know anything about the Tannoy GRF. Like Samtse said, M250s are a keeper.
Sorry to side track a bit.. but having owned the Strads previously, I believed those twin woofers are not 12". More like 10"s I think?
I like the GamuT a lot, but, you know, Pass is very good too : I talk about the Call A models like the XA100.5.
I'm sure that the Class AB designs like the X350.5 aren't as good with easy to drive speakers like mine.
The Tannoy GRF are 95db/W/m with 15" woofers and around 8 Ohms impedance.
Hi Ping,i also using tube pre(aesthetix) with my GamuT amp.which tube pre are using now?
Hello,
my GamuT D200 is directly connected to my dCS Elgar Plus, no preamp for me.