Conditioner for Cary MB500 Monoblocks


Hi all.

Tomorrow I will be installing Cary's MB500 monoblocks into my system. They will be running into the 4 ohm Aerial 9 speaker, so the amps will be putting out 1000 watts per side.

I have a Shunyata Hydra 6, and I'm not sure I want to run the amps through it. I'm concerned about current limiting, suppressing the soundstage...all the usual concerns about power conditioning. I will run the rest of the gear through the Hydra (cd, pre, etc), BUT....

I'm curious about people's experience with big monos and high end conditioners. The ones that have caught my attention are the Furman (ref 20 -- will the 15 be enough?) and the Exact Power (not sure which one). I'm open to hearing about other brands that have worked for you. APS anyone?

It's kind of expensive to experiment, so I'd be grateful for any actual experience you may have with high current high power amps and your conditioner.

Thanks in advance,

Rich (in Portland OR)
rbirke
Take a look at the purepower One 5.0 from Silvercircleaudio.

www.silvercircleaudio.com
Sirspeedy; I know we're both having fun but you can't throw the first stone and then tell a confronting poster to lighten up--- That job goes to a different poster.---That is how it works,get it??
I've tried both the Hydra and the PS Audio conditioners. The best I've tried so far is the Running Springs Audio (RSA) conditioner. No current limiting at all and more natural sounding than any of the other conditioners. They're a bit pricey, but they could be the best kept secret in audio (visit their website for more info). If you're just running your monoblocks, get the Duke (two outlets). If you're planning on running your other front-end components with the amps, get the Jaco (eight outlets). I've used my Jaco w/my Muse monoblocks (300 wpc) and also my BAT VK-500 amp (true dual mono design with two 250 wpc monoblocks in a single chassis, two power cords, two power switches, etc.). My RSA Jaco is a keeper and very happy with it.
Hi Rich, I am late to this party, but thought I would add that I too run Aerial 9's with Cary 500MB's. I am currently running mine single ended with a Lector CDP7 TL MkIII and Lamm LL2. I just picked up a loaded BPT CPC that has a 30-amp high current filter, 300VA LoNo balanced isolation transformer for balanced power on two of the five duplex outlets, Oyaide outlets, Bybees, filtering on all outlets, magnetic breaker, and ERS cloth inside. I can run my digital through one of the balanced power outlets, effectively isolating it from the rest of the system, then run the amps and preamp from the other outlets. Therefore, my whole system is now run from a 20A dedicated circuit, even though I have two such circuits available for my use. I know some like to run things off higher amperage circuits, but it seems since the amps each have 7A fuses, preamp has a 1A fuse, and CDP has a 2A fuse, even an all-out assult would only draw 17 amps and 20 amps should be fine or even 15 amps in most cases.
When I had my 500MBs I used them with Sound Application XE-12. Jim Weil claims that his conditioners do not limit current delivery. The 500 wpc Cary amps certainly sounded more relaxed, cleaner, with all the residual "hash" gone from the treble. There was no loss in dynamics or bottom end performance compared to running the amps straight from the wall.