Are Wilson speakers


I have posted under the Amp thread the fact that my Krell KMA 160s are too "mean, lean and sterile" in my sytem and have blamed everything but the speakers. I am currently deciding between a number of tube amps (Atma-sphere, VTL-450, Wolcott, etc - they must have balanced inputs and fill a 23 X 15 room with high resonance. Then I assembled a baby system in a 12X12 room - Jolida 302B (mod Underwood HiFi) and Totem Sig 1's, Naim CD 5, Nordost interconnects and Poeima! speaker wire) and it sounds magical, musical, engaging and glorious. So I blamed the amp only. Now, after listening again and again, and running upstairs and downstairs, to compare, a horrible thought struck me: Maybe it is the Wilson WP 3:2's that are not musical and engaging, rather than all the associated front end and power.........obviously, this is a reluctant conclusion, given all the positives written everywhere about the Wilson speakers and the expense in getting not only a new amp, but new speakers as well - let alone wife factor. So I will change the amp - since it seems to be a universal consensus that the Krell KMA 160s are "lean and clinical" (every dealer I speak to says so and I must have spoken to dozens this last month)and listen to the Wilsons with an Atma-sphere or VTL-450.
I cannot get a Sound Labs or Quad 989 because of wife factor and need the same/similar footprint as the Wilsons - I have seen the thread of someone looking for a pair of speakers under $15K, so will look at those 4 speakers - or try to hear them.
I dont want to bash Wilsons, as I believe they are a wonderful company (I will tell a Dave Wilson story on another thread that confirms what a great guy he is..........) but need A'goners help/input again to sort out my musical non-bliss with this expensive system so that I get the same musicality, involvement and engagement that I dont feel with it, but do with a baby system, costing a tenth or less, in my main listening room.
Thanks in advance for your comments on attaining musical improvement - this and a warm, engagement with reduction of the clinical, sterile sound is the goal.......

System:
Mark Levinson Ref 32
Esoteric DV-50
Krell KMA 160
WWP 3:2
PAD Dominus, Poiema!, PAD Venustas cables
BMI Shark, Michael Wolf PCs
PS HO/HC
springbok10
May I suggest you listen to the Dali Euphonia MS5s. These spks make music with all the detail and naturalness it makes other spks sound mechanical.
I believe that the Wilson 3/2s are somewhat lean-sounding.
Back in 1992, I had mine updated from the 2/1 version, which was quite warm-sounding. When I got them back, I noticed immediately that they had a very lean profile to them. I didn't care for it myself, so I sold them.
I don't think that toeing them in will change the leanness; it is not a matter of tonal balance. The speakers are lean. When I ran into Dave at a High End show the following year, he asked me how my speakers were. I shuffled my feet, looked at the floor and told him that I had sold them. He was astonished, and asked "Why?" I replied, "Dave, they're pretty lean-sounding." He acknowledged it, and we left it at that.
I'm not suggesting anything about the dynamic makeup of the speakers. I'm simply stating the fact that that particular version IS lean. I had the first three versions of the WATTS, back when the WATTS were being marketed locally (the San Francisco Bay area; Dave's factory was in Novato, 20 miles or so north of The City).
My understanding is that later versions are less lean. And, actually, at that time, Dave used MIT speaker cable and the Spectral DMA-50 amp, along with the Rowland Coherence preamp, which is "lush" sounding from the lower midrange down. I believe these were his main components in designing the WATT. He also used a Goldmund turntable (the Studio). I remember because he did the setup on mine, too.
I see I'm wandering, but I wanted to place the WATTS into the context at that time. The MIT cables are warm-sounding, which compensated for the leanness, and the Rowland absolutely supplied the WATTS with more lower midrange energy. Remember, the Original WATTS came out in 1986. The "Puppy" came out late 1988. Dave may have changed electronics after 1991, but given the sonics, it would seem that the was still using the Rowland preamp, which he thought more accurate to the source (see: TAS, issue 47, for his comments on the Coherence 1). You'll notice that he observed that the Coherence was more accurate in the lower midrange and upper bass, the SP-11 From the midrange and upwards. That was also the same issue that the WATTS were first reviewed.
This might help explain why the earlier WATT/Puppy designs were leaner than later versions.
Hope this helps.
I think you are right. I tried the little Totem Signature 1s in the large room with the KMA 160s and they did sound surprisingly good for baby boxes in a large room - and warmer - so I think it is the speakers rather than the amp and the front-end and room acoustics..........