Firstly thanks to everyone who responded. I have biwired them and found it to be a bit more dynamic than the single wire. I bought the speakers as a dealer demo and believe they are fairly well broken in. The overall sound is fairly open though the imaging is not as stable as I would like it to be at times. Perhaps a bit more break in time is needed? As I said I hope to tighten the bottom up a bit while maintaining the refinement and openess at the top. I had heard that they do use Analysis Plus wire internally so using Oval 12's or the like may make good sense. I wonder exactly what cable they are using on the inside? Thanks again everyone!
Speaker Cable to pair with Soliloquy 5.3's
Which cable are you pairing with the Soliloquy 5.3's? What has your experience been? Bi-wire or no? My current cables are Lat Intl 1000's which have a very open and airy mid and and high section but the bass is a little loose and unrefined with the Sol's. The same wasn't true with my previous speakers. I have tried a few other pairs both biwiring and single runs and found a couple that gave a deeper, tighter cleaner bass but those that did seemed to present a veiled mid and rolled top end when coupled with the 5.3's. So let me know what combinations you are using out there and what you have found that works! Thanks!
- ...
- 8 posts total
- 8 posts total