Comments / Observation on Dynavector 505 tonearm?


Hi Analog fans/experts:

I am trying to get information for this arm.

I own a VPI JW19MkIV (TNT platter) with an RB300, and have a friend who is selling me his Dynavector 505 arm. I have at hand an additional undrilled armbase for the VPI, currently using a Denon 103r cart/Michael Yee phono preamp.

1.- Can you share with me your experiences with this arm?
2.- Is it a safe choice to install it on my VPI?
3.- What pitfalls should I avoid?

Thanks for your valuable insight.

Fernando
128x128flg2001
Thanks for your valuable feedback, I was not lucky enough to win the bid and pursuing another options such as aGraham Robin or STax-Saec.

Fernando
Hi: I am surprised that there seems to be a demand for this
arm. I could never get the one I owned to track right and
it sounded only fair. But, they look different and high
tech enough that some people are enamoured with them. Good
luck. I would like to hear that someone has used them with
good results. CEM
I am not sure this tonearm is as good as they say for some reason. I was very uncomfortable with its sound, tried it with quite few carts from Grado Statement to Ortofon Kontrapunkt to Dynavector's own XX-1 with no positive outcome.
YMMV of course.
I had a customer's DV-507 and his XV-1s for about 6 weeks. He wanted me to break everything in for him.

I don't know how this relates to the 505, but there were two usability issues which immediately disqualify it from consideration for me. Both make it easy for the owner to unwittingly trash a cartridge. The first one can be fixed (which I did for my customer) - to replace the nylon tipped set screw (gross VTA height adj) with an Allen keyed steel tipped screw. I realize why D-V chose the nylon, but the problem is that if this screw slips, your cartridge is at great risk, because there is limited upward travel of the headshell. It's very scary.

The second way you can lunch a cantilever is by being temped to use the very nice VTA adjustment scheme to adjust VTA in play (don't do this !!). You fine adjust the VTA by loosening a lever at the base and rotating it one way to raise and the other way to lower. It's a very slick design, but if you unscrew this lever a couple of turns, it disengages from the helical slot and down goes the tonearm on the cantilever. If you're aware of this, it's really not a problem.

Thirdly, the cantilever can only clear the LP by about 1/4" because of the limited upward travel of the headshell. This scares me too.

Having said all of this, the DV-507 was a reasonably nice sounding tonearm with the magical XV-1s riding on it. Truth be told, I think it was a bit too laid back considering that the XV1-s errs on the side of sounding slightly forward sounding. So, if you end up with one of these arms, don't get a cartridge that tends toward the lush side.

Cheers,
Thom @ Galibier
Dear Tom: Your first issue about thenylon set screw: this did not exist on the DV-505, so there is no problem here.

I agree with you that the changes in VTA have to do " out off the road ".
The thirdly is not a problem at all.

+++ " I think it was a bit too laid back , " ++++

Well, I think is a neutral tonearm with the right cartridge ( like own Dynavector XV-1 ). The perception of " laid back " sound is a subjective issue that have to " see " with what we like, but I respect your opinion. I own the 505 not the 507 . I remember that I installed my Koetsu RSP in the DV- 505 and with a very pretty sound ( maybe with a little low bass loose, but not laid back " per se ". ).
The 505 tonearm is an excellent tonearm with very cleaver design and a bargain at the " used " price that we can find it. I like to use it in a statically balance way.

Tom, try the 507 in this fashion balance instead dinamically balance way and let us to know what you experienced about.

Regards and enjoy the music.
Raul.