Best Cheap acoustic wall treatments?


I am converting a 12x20 space into a home theater and want to treat the room. The walls and ceiling are drywalled, with thin carpeting on the floor. Are there any inexpensive wall panels or the like that are available? Should I consider draping the entire room in fabric? Thanks for your thoughts.
jmslaw
http://www.primacoustic.com/index.html

Especially the Europa Flutter walls an 8' x 3' array costs about $220 Canadian. You get all the pieces and glue them on so you can take the 8' x 3' and use it on 6' x 6' for example.
I have some non-foamy suggestions.

How about curtains? Maybe not along the entire wall, but in certain key areas like first reflections and so on, possibly to suggest windows that are non-existent.

If you eventually put up shelving for your media that could be effective as well.

Good luck!
Some great tips- Thanks! Drguayo, those primacoustics products look great! I checked the site, but they don't have prices listed. Do you have any idea what their basic packages start at?

Thanks,

Jeff
Jmslaw,

Did my entire dedicated sound room / HT with inexpensive DIY treatments. Check out my "system" link.
If you don't mind a weekend or two of work, this is a very attractive and yet works as good, if not better, than purchasing expensive and ugly commercial stuff.

1) Take 2x2s and run them horizontally every two feet on all your walls.
2) On your front wall and your side walls, up to the point of first reflection put 2'x4' rigid insulation (I used Owen Corning). Between each one, run 2x2s vertically.
3) For the rest of the room, if you want the benifits of insulation, get some cheaper rigid insulation that has silver foil on one side. Put that between the 2x2s with the silver side out (otherwise your room will be to dampened) and continue with the vertical 2x2s. If your room doesn't need anymore insulation just add the vertical 2x2s every 4 feet and leave space empty.
4) This is the part your wife will like. Get yourself a fabric that you like and stretch it onto the 2x2 frames and stable it there. You will want to run it horizontally.
5) Get yourself whatever molding you like and frame the cloth with the molding along the bottom, top, one down the middle of each wall where the cloth overlaps, and of course the corners.
There you go, looks like expensive wallpaper. And now you have a live end, dead end room with acoustic absorbtion surrounding your front speakers. A couple of DIY bass traps in the rear corners and your done.