I'm trying out a DP6. Do I just trust the Moerch (non-precision armwand) alignment method of lining up the stylus tip with the leading edge? Or has anyone out there used a particular protractor successfully?
Well at least I don't have to worry about S2P because that's set accurately at the factory. Did either of you try the Moerch method first or did you just go with the MintLP right away? I'm curious if you found the Moerch method to be off. I emailed mint for a quote for my turntable and the DP6.
Moerch method ?? No, I haven't tried it, and I can't see how it can be accurate. I used the Clearaudio protractor which is not so precision. The MintLP is arc protractor where you can zero in. But you need a very good eye sight. I always have a hard time using it. I'll be getting the Uni protractor in a near future.
Moerch's method is to line the sylus tip to the leading edge of the head of the arm and then check the overhang with a ruler between the spindle and the tip. There's a lot of gray area in it all. I ordered the Mint and I'll report back.
When you get your MintLP, you can check how way off you are. The beauty of Mint is that arc start almost at the spindle and extend way beyond your platter. You won't need any special skill, just patience.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
