SAE X15A


Hello im stuck on a problem i cant seem to figure out, I have a SAE X15A power amplifier i purchased as is. It stated right channel was blowing fuse, I fixed that but now I have this weird thing going on with the left side. After powering up everythings good, but after a few seconds the left power meter goes crazy up and down over and over with no input plugged in.Ive replaced all 4 of the LM324N on the meter board for that channel and replaced all the caps, I also found a NTE transistor on the input board and replaced it with factory MPSA56.I tested every component on the input board and power board its all checks out.there is a opamp on the meter board marked 11-0168 SAE P/N and RT7651 but cannot find any info please help thank you all very much.

raysgone

I don’t know what the opamp p/n 11-0163 is. But did you check for noise on the output of that channel? I’ve had problems with the pre-driver transistors.

THANK YOU THANK YOU i took these out before and checked them and they seemed ok so i left the in I took them out and replaced them with mje15032/33 and souds great