Supratek Owners Thread


Greetings All - 
It appears that the 26-million-plus view, multi-decade "Preamp Deal of the Century" Supratek thread has been removed. I'm not sure why, but suppose there must be a reasonable explanation.
In any case, on that thread I recently asked whether there might be interest in a "Supratek owners thread" and received some interest. 
The purpose of this thread is for Supratek owners to share the details of their system, ask questions, share information about any tube-rolling they have done, and so forth.
I'll kick us off here with a few details about my system -
ancient Linn LP12 with Ittok arm, Dynavector 17D3 cartridge into Cortese LCR phono stage
Power amp is a fully serviced Innersound Electrostatic amplifier
Quad ESL63 speakers (not USA monitors) or JBL 4430 studio monitors
Digital sources are immature and evolving - ancient Fostex CR300 cd player/burner
DacMagic 100 DAC
Nordost Blue Heaven 75ohm interconnect
Due to the fairly long lengths of speaker wire required in the new listening room, speaker wire is Belden 12 gauge wire designed for low-voltage outdoor lighting systems. 
Next steps - dedicated circuit, new power cords, new interconnects, new wires.
128x128markusthenaimnut

@jtgofish 

I rewired everything and reseated the tubes just to see if there was something I did during setup that could have been incorrect.  It turned out that the switches that select 2.5v vs 5v on the DHT tubes were set incorrectly.  I'm running 300b and once I made the change it started working.  

Yes those little toggle switches!Glad you got it working.Now enjoy the 3D ,dynamics and vibrancy they bring.

The EML 45's are great,  running a pair of the 45 Mesh on my Grange.  Wonderful tube!