forte 3 crossover build

need crossovers built any one know who could or would do this

Have you ask Danny at GR?

I have a question. You don't like the way your speakers sound, or have herd the GR XO mod?

I just wonder how he balances left to right without having the physical drivers/boxes from your system there.. No two boxes have the exact same drivers.. And no two drivers have the exact same impedance.

Maybe I'm being to picky. It's just the way I've seen it done on dozens of pairs of MATCHED speakers.. The two OX never look the same. The coils are hand trimmed and different measurements should be written on the coils and caps to reflect that.. (In case a component fails for repair.)

https://www.madisoundspeakerstore.com/xover-design

They design, I'm sure if you ship them your parts they will put it together for you.

There are a few that will build XOs but normally they want you to buy their STUFF..

Happy hunting though

says he is to busy for that also tried volti and there to busy to

madison sound cant do it

Wow that is a BIG XO, for being in a speaker. That thing would be outside the enclosure for me.. No way it would go inside.. That is a going to have vibration issues.. Period.. There would be silicone everywhere.
I only see zip ties... That may secure the coils, but no way inside the box.
BAD idea with bass in the box and that flexible HUGE XO with upright coils.. Mine would be heaped up with hot glue and silicone OUTSIDE.
You can trim the goop to look very nice.

The old XO is far better as far a vibration control and size for sure..

Pretty typical of Danny using foam vs sound coat and insulation. The stiffening inside I would wrap with dampening material like dyno mat or something.. They BOING if you don't.

I cut the long panel lengths in half with a 3/4 X 2" brace sound coat the inside and black hole the baffle face. Heavy insulation for the bass and wool for the mid/highs. Change the terminal ends to some good ones..
He really like tube connectors.. I like pure red copper I don't care who makes it..  It can be battery lugs for all I care.. Heavy pure copper NO gold plating or any thing else..

I'll bet if you just redo the inside of the box correctly, you won't need to do a darn thing. The 1k peek he was talking about.. ??? It's a peek, easy peasy. Not a valley or suck out..  Wall panels will tame a 1K flame or EQ for god sakes.

What state does jerrygarcia reside in?

Regards