2. amps-preamps
  3. 166953-161916

endgame Amp for my Audiovector R3 Arrete

Hi all!

Before driving across Holland to do some listening sessions with my shortlist I was curious if anyone here has some experience with my shortlist of int Amps (in combination with Audiovector R3 would be nice)

These amps on my shortlist all carry the same pricetag more or less here in holland (14 / 15K euro)

Esoteric F03A
Accuphase E800
T+A PA 3100HV
Vitus Audio RI101 MK2

US brands are expensive here and hard on support, so no Pass Labs, Boulder etc.

After all my research online and some listening sessions with Dynaudio speakers I think Class A is nice/sweet so im learning toward the first two. The Accuphase has more power on paper (50) vs de 30 of the Esoteric. When it comes to looks I like the Esoteric much better.... not as bulky and I like silver better than champagne. I know this is about audio quality but I like to take looks a little bit into consideration as well ;-)

What would you advice as the price tag is similar access all four?

Thanks for your time!
holland440
maxwave's avatar
maxwave
924 posts
 
Do not forget, Audiovector R3 Arreté , have AMT tweeters.
Depending on your room and your ears ,they may sound a bit bright  in the high frequencies.

If it is the case, a tube amplifier, should be on your list
( I own Audiovector R6 Arreté with a glare and bright issue )
holland440 OP
3 posts
 
Thanks for your reply and consideration! What amp do you use? Do you regret getting the R6? Or system matching issue?
chicagoblue1977's avatar
chicagoblue1977
224 posts
 
Simaudio works very well with Audiovector and usually partner at the audio shows at least here in NA.
Not sure if a Canadian company will be any better trade wise. Know that Simaudio has distribution in Europe.
maxwave's avatar
maxwave
924 posts
 
@Op I use Soulution 330 INT . Class A amplifier
Lumin X1 , 5.6 Mhz  DSD mode  : it is softer
Audiovector R6 Arreté have a very good bass , and midrange.
But , for my aging ears ; the high frequencies have too much presence with piano , flute .
I am working on room acoustic ( absortion pannels )
I have never had , these issues , with berillium tweeters.

I have been told that a tube amplifier would help.
Also, to put wool socks in front of the AMT tweeters. Not exited
about this one.



holland440 OP
3 posts
 
I read great things about Soulution and the R6 as well. Both well above my budget.

im really happy with the R3. Compared a lot to the Dynaudio contour 30i. 
Thanks for your valuable feedback 
More to discover