2. speakers
  3. 150255-80275

speaker/stand, couple or isolate?

I've read a lot about floor standing speaker interaction with the floor and whether or not isolation or coupling might be the right approach depending on the type of floor, e.g., concrete, suspending wood floor, etc. I suspect the same rules apply to the speaker and the stand as a unit but what is the common wisdom about how should standmount speakers be placed on the stand, especially the larger/heavier speakers on 4 leg sand/rice filled heavy stands where tip over is not much of a concern. Thanks.
128x128kalali
shakira
142 posts
 
Hey Guys 
My experience over the years is that 
tip toes or spikes under the speakers works well on wooden floors,you put them on concrete floors the sounds becomes too lean.
For concrete floors I used very thick maple 
and the sound is more natural and well balanced from top to bottom.

geoffkait's avatar
geoffkait
23,365 posts
 
In years gone by, Tekna Sonic dampers for speaker cabinets and subwoofers effectively dissipated cabinet vibrations - with no side effects. Sadly they went belly up 🔝many years ago. The good gnus 🐂 🐂 is that isolating speakers accomplishes the same thing, dissipating cabinet resonances, plus prevents any hint of mechanical feedback 🔙 to the front end electronics. The only good cabinet resonance is a dead resonance ☠️ Speakers are not (rpt not) the same thing as musical instruments. 😬
meiatflask
145 posts
 
Expanding the discussion, what about Maggies? Spike or isolate?  I’m thinking of the smaller (LRS, .7, 1.7).  The advantage of non-spikes (my current approach)  is that I can slide the Maggies “out of the way” as my wife says when not listening.  As many of the points made above talk about vibrations in the box, do these arguments apply to Maggies?
More to discover