Thanks for the info Lakiraly and Trelja: Now I understand your old post on gage/feet Trelja, before it was over my head. For around $10.00 (if I can purchase this minimum amount) I will have to try it. I am still fascinated by little inexpensive things that can be done to improve the sound of a system. I realize that many people do not have the time to spend on DIY stuff and just buy finished products (like in this case the jumpers from Pure Silver Audio that are relatively inexpensive but around $100.00 more than this recommendation). I am also intrigued with using silver as a conducter after trying silver interconnects.
Simple Question. Simple Answer?
Istead of using jumper cables on my bi-wireable speakers I stripped 3" on the ends of my Kimber cables and ran them through the LF post and on up to the HF post. I took the flat connector plate off. Did I do the right thing using one unbroken wire to complete both circuts? Would making a seperate jumper from the same wire sound better, worse or the same? I could try it of course but this would require stripping an additional 32 individual wires. I did it with a medium sharp box cutter before because both of my strippers had a tendancy to damage some of the individual strands, it took a long time and that was for only 16 wires. I have read previous posts on the subject but they do not address the one wire method that I used. I would also be up to trying a seperate silver wire jumper if I could make it myself on the cheap. Could I use a solid core silver wire for this in one run with no insulation or connecters? If so what gage would I want to use? My mono amps for bi-amping did not come in on a shipment as expected so I would like to experiment with this in the meantime. This is why I would rather put more thought than money into the project other than the fact that I am cheap. Thanks.
- ...
- 16 posts total
- 16 posts total