Source of Brightness


I have rigning ears from the brightness in my system. Linn Genki, Meas Baron, Magnepan MMM (1.6s ordered). What is the source and solution? Robert Harley in TAS on SACD said that the CD brigthness/harshness wasn't there on the SACD and in the past the best CD players balance brightness with detail. Are high end makers walking a tight rope due to an inferior souce format?
morasp10b3
As a content owner of a Linn Genki I can assure you it is not the CD player. The problem likely lies primarily with the room (the forgotten component), or perhaps with the cables. Or, as the astute Mr. Eber notes, you may have the condition known as 'tinnitus audiophilia,' which is unfortunately almost always fatal (to your bank account!)
Thanks for the feedback. I didn't mention, the wires are analysis plus oval9 speaker, and cardas cross interconnect. The room is 18X24, and the speakers are 5' from the rear wall. I starting to think that it is a combination of CDs being bright and since the sound is so clean maybe playing it too loud to here the lower level details of the recording.
Audiolover might be on to something. I was also experiencing brightness from my loudspeakers (SF Guarneri's) and beginning to worry about cables, etc. But..to get eh best soundstage/imaging, I have te speakers almost 5 feet our from the back wall and ~ 3.5 ft out from the sides. Although he SFG's can in theory go down to ~ 45 Hx "in room", in this configuration the sound pressure was beginning to drop at ~ 60Hz, and was down a full 14 dB at 40 Hz. The result? I was cranking up the volume to hear the bass, and the speakers were naturally sounding VERY shrill! Well..just added a REL Strata III, and managed to bring the bass response to within 5 dB of reference from 30 Hz on up. Guess what? Not only do I now get bass..but the speakers no longer sound bright, the soundstage is huge, etc., etc. So...get a sub-woofer (after seeing a doctor about the ringing in your ears!). I have no experience with other subs, but the Strate III at $ 1295 was a revelation and extremely flexible/easy to integrate.
After recently changing tubes in my DAC there was a sudden increase in shrillness and glare. Of course, my first inclination was to blame the new tubes even though they were supposed to be an upgrade. Turned out the culprit *was* the tube change. It brought out a great deal more clarity at the higher frequencies which made the lack of room treatment obvious. Adding some sound absorbtion directly behind the speakers at the front wall cleared things up tremendously. Try stacking pillows there and at the point of first reflection on the side walls. It just may fix the problem!
Fpeel brings up a good point re: tubes. I hadn't changed the tubes (6 6922s) in my pre-amp for a year+ and my system was starting to give me headaches. I changed tubes, broke them in, and all was well. It really did make a huge difference, but tube wear creeps up on you so slowly that sometimes you forget about it. I note you have a Mesa Baron amp. How are its tubes? Maybe a different brand/type of tube etc. Good Luck. Craig