Wilson MAXX musicallity and sound

How and why would I forget IM Distortion???? It's way more important than EQ in making the system "listenable". You're shooting at the wrong target when you put all your focus on EQ.

Dave

I wonder how we'd measure the intermodulation distortion at the listening position, do you have any ideas? This is about way more than frequency response.

I don't think you mean IMD. IMD comes from an amplifier driving a bass signal (amps) and a midrange signals (milliamps) at the same time. The huge demands from the bass signals will cause new frequencies to be intermodulated around a vocalists voice or other midrange instruments (called sidebands). These intermodulations are totally unrelated to the voice of the vocalist and are very intrusive. For example, a kick drum at 80 Hz played at the same time as 500 Hz, 1000 Hz and 2 and 4 Khz harmonics from a vocalist creates all kinds of additional frequencies....920 Hz, 1080 Hz, 2080 Hz, 1920 HZ, 4080 HZ and 3920 Hz and many more multiples of the 80 Hz. such as 1160 Hz and 840 Hz and so on and so forth. This results in a loss of clarity and makes it harder to hear detail - it can also be fatiguing. Think of it as a blurry lens...or camera shake on a photo...the amplifiers huge efforts at big power hungry kick drum bass is "shaking" or "blurring" the midrange vocalist.

However, this is not what I think you mean. I suspect you are referring to Comb Filtering. This is where one reflected wave interferes with another. For example: bass frequencies are omnidirectional up to about 600 Hz so these frequencies radiate backwards from your speakers, bounce off the wall behind them and selectively reinforce or destroy all of what you hear in the lower midrange.

There are only three known solutions to properly hear the lower midrange primary signal;

1) Place speakers at least 6 feet from the wall behind them and sit close to the speakers (this reduces the effect dramatically and it is exactly how near-fields are used in studios to get an accurate mix)
2) Soffit mount the speakers (eliminates the issue altogether)
3) Headphones

Above about 600 Hz this is a non issue as the rear wall behind the speakers no longer has any effect as sound only raidates forward from typical box speakers at these frequencies. So this issue is most noticeable on male vocals. If you find female vocalists very tightly placed in the soundstage and beautifully transparent and crystal clear but male vocalists do not sound quite as clear, transparent ot tihtly focussed in the same way => then "comb filtering" or rear wall quarter wave cancellation is typically the problem....move your speaker well out into the room if you observe this!

I agree with Gerrym5

There is a guy on AVS with the exact same speakers and he has a set of LAMM's and swears it the best he has ever had. Yes, subjective, but apparently several members have also hear the system and are complimentary.

As for Accuphase, well power amps isn't what I think of when I hear Accuphase. transport/DA, etc maybe. Falls into the same camp as Esoteric, though I think Esoteric makes a superior digital product.

"IMD is is the result of two or more signals of different frequencies being mixed together (as in a stereo speaker set up where the signals are not always equal in frequency), forming additional signals at frequencies that are not, in general, at harmonic frequencies (integer multiples) of either." (Wikipedia)

"A comb filter adds a delayed version of a signal to itself, causing constructive and destructive interference. The frequency response of a comb filter consists of a series of regularly-spaced spikes, giving the appearance of a comb." (Wikipedia)

I think that both exist in our speaker systems. Prior to experiencing the Sumiko Master Set I dealt with these issues by moving my speakers six-plus feet out into my room. This sacrificed bass performance and still could leave female voices "shouty" or "hooty" and trumpets hardedged and harsh, rather than brilliant.

The Master Set minimizes these negative effects, rendering the system much more transparent and detailed, while removing stress and harshness. It's like a major upgrade in equipment when you experience it.

Dave

Dave-

I'm not putting all my focus on EQ. First, I want to know
what the frequency and pulse response look like, and use that info along with listening to position the speakers before applying any room correction.

With your rear ported speakers a foot out from the wall behind them, I doubt you're getting flat bass response.