2. pro-audio
  3. 176300-172967

VPI H-16.5 record cleaning machine power failure

I purchased an unused machine secondhand (the guy died before using this, and his estate simply wanted to sell it on). Well, on getting this home, it worked fabulously for about ten LPs, then power failed. I'd treated the machine with the utmost care, drained the excess fluid etc.

I discovered that the onboard fuse had blown, since replaced. The main fuse in the plug was also replaced, though had not blown. But both switches (vacuum motor, and platter) still fail to switch on. What, I ask, could cause both to fail? 

And, is this machine what it's cracked up to be? In terms of build quality?

secret-vinyl
jperry
2,448 posts
 

I don’t know what is wrong with your VPI record cleaner, but I have had the same model for over 10 years and it has always worked perfectly.

You should contact VPI, and if you haven't check for troubleshooting tips in the manual.

I would post this in the Analog instead of Pro Audio forum.

secret-vinyl OP
4 posts
 

Thank you. The manual offers no clues. In contact with VPI, who hopefully will respond. 

kgturner's avatar
kgturner
663 posts
 

Best bet is to contact VPI. I've also had a HW16.5 for over a decade now I believe and the only problem I ever ran into was the unit would over heat & shutdown during long cleaning sessions (20+ LPs). I was going back through my collection & cleaning everything at the time once I got the HW16.5. Haven't had that problem since as I'm rarely cleaning more than 5-8 LPs at any one time.

jperry
2,448 posts
 

Audio Aficionado has a dedicated VPI forum that may be helpful

 

More to discover