Two Turntables and Hum Problems - Help Please

18-20 feet is still mighty mighty long for a cable transmitting such a miniscule signal. Above all other cables I would try to keep the phono cable as short as possible (and make sure it was shielded). Without shorter phono cables (or maybe balanced cables) I would be surprised if you are able to get the hum out of the vinyl setup.

The gauge of the rca extension cables won't make any difference. What is important, in addition to shielding effectiveness (which is hard to predict) is (as I mentioned earlier) keeping cable capacitance as low as possible, particularly if you will be using moving magnet or other high output cartridges. I suggest Blue Jeans LC-1, which provides very low capacitance per unit length at a relatively low price.

For purposes of minimizing hum, the kind of grounding wire you use is not critical, as Elizabeth indicated above. I suggest initially experimenting with whatever is handy, or whatever you can get cheaply and conveniently at Home Depot, Radio Shack, etc.

If and when you eliminate the hum, however, you may then find that you are picking up radio signals or other interference. To address that kind of problem, the best type of ground wire would be a "braided ground strap." Google that term for further info, if necessary.

Regards,
-- Al

Continued thanks to all for your suggestions. I'll let you know how I make out once my schedule slows down in a few weeks.

Since I cannot reduce the distance the between the two turntables and the respective pre-amp and receiver, Elizabeth and other suggest getting inexpensive phono preamps for each turntable. I'm looking at some that are about $50 each. Does that sound right? Any brands anyone suggests, in particular? Does jumping straight to getting phono preamps (I may even have one in the attic now that I think of it!) sound like a good starting place (before changing the extension phono cords to better shielded ones, before replacing ground wires, before disconnecting cables to my two (separate system) sub-woofers? Thanks folks!

Wayne

I just dusted off an old Kyocera TT with a Blue Point cartridge and bought a Bellari 130 (tubed for $250) and couldn"t be happier. I'll be upgrading soon but for now the Bellari sounds way better than $250.