Two Tonearm Turntable: Need Suggestions

I can't think of any that also meet the 78 rpm request right out of the box.

If the 78 rpm requirement is dropped, here are the following turntables that handled at least two tonearms that I know of:

1. The Teres 340-2 has a special base to install two tonearms.

3. The Micro Seiki DQ-1000 and DQX-1000 (both discontinued) were designed to accommodate as many as three tonearms. There may be other Micro-Seiki models that I am forgetting about.

4. The Denon DP-series (1000 through 6000, all discontinued) I believe were purchasable as a core drive assembly. You then made your own plinth + armboards to do the job. I've seen several of these on Ebay that had two armboards already set-up.

It should be possible to modify one of the VPI turntables to accommodate two tonearms. There is a 78 RPM option on the Aries 2 series, Scout, Scoutmaster, and the TNT-series. I didn't find a 78 RPM option for the HW-series (probably not a good idea on a suspended turntable).

Mr. Kidknow

Nottingham tables are often setup with two arms. The second arm pod is an option for about an extra $500, and I believe this is available on most of their models. See it many times on the Spacedeck. Cheers,
Spencer

Spencer, as you know, I've done several times on a Spacedeck. However, no 78 rpm! :-)

Dmenagh, are you lcked into a NEW table? Handy? Checkout the Lenco thread ("Home Despot") below for another possibility.