Tube Rolling with the Line Magnetic 518 IA


I recently took delivery of the fine Line Magnetic 518 IA. This is an excellent integrated except it comes with basic inexpensive tubes. I'm lloking to hear from those who have done any tube rolling with this amp and what combination turned out to be the most musical sounding. Also interested in how many hours it took to break in this amplifier.
frontier1
My dealer mentioned liking the Gold Lion input tubes in the LM's. As far as output tubes, I am liking the SED winged C's, but of course that doesn't help in your case. Quite a change from Shindo there. Glad you are liking the LM.
The power tubes are actually quite good, the Psvane HiFi Series 845.

Pre-amp tubes: try Gold Lion Genalex 12ax7s. And Psvane Treasure mk2. And NOS. One of my favorite current production 12as7s is the Mullard at about $17 per tube. Nice and warm but not the final word in detail.

Rectifier: try a new production Genalex, Mullard or Tung-Sol.

Drivers: I like a good EL34 or 6L6: SED winged C (while they last; they recently went out of production). Try TAD (Tube Amp Doctor) 6L6. Amazing tubes.

See my review of the amp on www.wallofsound.ca
845 - Psvane

12AX7s - Mullard ECC83, long plate, goal post getter with code f91 on tube (about 1958), about $200 - 250 for a good matched pair on ebay from a good seller.

6L6/KT66: original (not reissue) Genalex, matched pairs $300 - 400 on ebay (a pair there now at $425 buy it now).

5AR4/GZ34: Mullard BVA or Phillips Mini-Watt, both metal base ($300 - 400).

You've bought an $8K integrated...treat it right. :0)
I'm about to take possession of a 518 and wondered about tube rolling as well. Would be ok to suggest some trusted/recommended ebay sellers?