Speakers in the 5-6K$ region & their components


Hi all,

This is my 1st post here.
I'm a long time audio enthusiast and even worked in high-end audio sales for a few years a while back, but I've been out of the loop for a few years now. I'm looking now for a new pair of speakers in the 5-6K$ range to replace my current Merlin TSM. The type I'm looking for is a 2 way 6-6.5'' speaker, preferably a floorstander. I know many brands and models and went through a lot of speakers in the past, so my question is a technical one:

I'm looking only for speakers in this range which use high end componenets. which ones are there?

I've already done some research, so here are a few examples of what I mean:

Proac in its response range is using Scanspeak D2604 tweeter (48$/unit).
PMC in its "i" series - Seas 27TFFC (45$/unit).
Spendor, "A" series - Seas 29TFF/W (52$/unit).

I can go on and also bring examples of the woofers used and more speaker brands, but I think the picture is clear. These are all quality units of well acclaimed manufacturers, but are by no means high-end units. Which are?
My research brought me this far to the following (All in my price range):

Kudos audio Super 10/Super20: Seas T29CF-002 tweeter (330$/unit) + a version of Seas W18NX (196$/unit)

Marten Form Floor: Accuton C173-6-095 woofer (over 300$/unit) + a ribbon tweeter I was unable to recognize (anyone?)

Merlin VSM (as second hand only): Dynaudio D330/A tweeter (over 400$ per unit) + Scanspeak 18W/8545-01 (173$/unit).

BTW, my current Merlin TSM is using Morel MDT30 tweeter (80$/unit) + Morel MW166 woofer (124$/unit) and sounds wonderful to my taste, despite a considerable lack of bass (being a sealed- box design). 

So, given all that, does anyone have any more ideas for speakers I should consider?
roylindenfeld
Well the Chapman T-5 has a 10" transmission line woofer and a 5" midrange and a sweet little 1" silk dome tweeter. Who says you can't have it all?


Magnepan 3.7i if you can get them 5 feet off the front wall and five feet apart or more.
Phil3 from philharmonic audio uses high components such as raal scanspeak and bg in a tl enclosure.  Bass and clarity throughout the range. 

Whatever the design the transducers used will impose limits the designer will work within said limits. Many loudspeaker manufacturers use very affordable parts so they can make profits.  Those saying that cheap is fine its the magic of the designers are a bit off and I feel they think us loudspeaker designers to have a magic when we do not. We work with many compromise to come up with a useful design. And yes the parts quality maters a good bit. Sure a good cook can make poor quality food palatable but just think what they would do with quality ingredients to start with?