2. analog
  3. 1338967065

Sota sapphire question-power supply fuse rating?

Hi; I have acquired an earthquake-damaged early vintage sota sapphire (serial no. 13522) which I'm trying to patch up. Have contacted Donna at sota for advice, but the always-helpful reply might take a while and I need to get it working ASAP!

There is a 1.25" fuse in power supply which has blown; I read a forum note here which said you can blow the transformer if you get the fuse rating wrong, but I can't find correct fuse ratings, or sapphire power ratings to determine these anywhere!

We are on 230v power here if it helps in determining correct fuse rating...any help appreciated.

Mom
yourmomm
kijanki's avatar
kijanki
4,428 posts
 
Yourmomm - It should be printed on the fuse end cap. "T" usually stands for slow reacting fuse.
manitunc
795 posts
 
Yes, it should be on the blown fuse, something like 2A or 3A which stands for 2 amp or 3 amp. Voltage doesnt matter in this instance. Almost all fuses are rated for 240v.
yourmomm OP
12 posts
 
Yeah thanks. But it's not printed on the fuse Anywhere....I did start there before asking the question!! There are markings on the fuse but no numbers at all; only the name of manufacturer. Besides which, the fuse is blown, and there are no guarantees it was the correct rating for the power supply in the first place...so that's also why I asked. Didn't know American fuses were rated for 240v...sounds like a recipe for confusion on a 110v system...

Still looking for an answer:-)

Mom
tonywinsc
583 posts
 
I just took a look at the fuse in my Sota power supply. It says, "BUSS MDL 1/4" on one end and, "250V" on the other end. It is a slow blow fuse. It is the original fuse. I know because I bought the tt new.
yourmomm OP
12 posts
 
Thanks Tony-any idea of the current rating then? "buss mdl 1/4" = 0.25A, 1A, or 4A, or none of these?! Never seen a fuse rating of "1/4" before....!
many thanks in advance forumites
More to discover