Siltech cable guages i.e. AWG


Hello;

I've been trying to get some information on the gauge of some of the Siltech lineup and haven't been able to find any information. The Siltech website sucks, next to no information on their cables. I sent an e-mail a few days ago but haven't received a response.

It's the speaker cables and power cables I'm most interested in and at this point even seeing an aggregate gauge of the cables including shields would be of help.

I'm interested in the following:

330L
550L
770L
Prince
King

SPX-800
Ruby Hill II
Ruby Mountain II

For power cables the largest gauge cable I'm familiar with is the Kimber PK-10 series which I believe is aggregate 10AWG so I can use that as a reference. Similarly for speaker cables the largest aggregate cable I'm familiar with is the Kimber Monocle XL which might be around 8AWG. So even if people were able to say for example the SPX-800 is roughly the same thickness as the PK-10, or the 770L is about as thick as the Monocle XL that helps me get an idea.

Thanks
brystonuser

Hi Brytonuser, I have had 550L, 770i and the Princess, and was able to A/B the Princess in the context of 550L speaker cable. At the time I was using a Sugden IA4, Ayon CD3s and a pair of Totem One limited edition model, I may have had my pair of Totem Embers to hand at that point too but can't be sure. Anyhow I can tell you that the difference between the 770i and Princess was stark. The 770i is excellent and nothing seemed amiss until the Princess was installed, suddenly it was clear that the 770i seemed lacking in the bass and seemed to be more tipped up at the high end and somewhat thinner, something I could never have guessed without having the Princess to compare it with. Oddly, resolution seemed higher with the 770i, but this was infact an illusion created by the overall balance of the cable highlighting the leading edge of the music more in comparison to the micro details/harmonics, whereas with the Princess the balance between micro/macro details were very obviously more in harmony, and there was substantially more structure to both with the Princess. Having experienced this and also endured the burn in process with the Princess, I can see how the Princess may not impress that much following the initial wow period which lasted a couple of days. However, after 300/400 hours of using the Princess I knew it would be impossible to return to the 770i. I hope this helps.
Thanks Deedo, your post was very informative. Certainly looks like I'll have to bite the bullet and get the Princess.
At long last I finally purchased my 1st Siltech cable. I picked up the Golden Ridge II and had Furutech carbon/rhodium XLR's installed.

Quite the impressive cable aesthetically. I went with 1 meter to keep cost down and avoid excess wire but that nearly backfired. With the cable being so thick and not overly flexible it was close to not being able to be bent back around as it left my Bryston BDP-2 and came back into my Lexicon MC-12. Any shorter and it wouldn't have worked. On the other hand at say 1.5 or 2 meters, given the thickness I'm not sure how well it would have coiled, if at all so that may have presented it's own challenge.

Compared to all my other cables in the back of my rack, this looks like a huge power cable in comparison :) It's very close to the thickness of my Kimber PK-10 Gold power cable.

Very happy though to say the least. Looking forward to adding the Princess next.
Excellent. I've read the digital cables are very natural sounding provided of course the source is. I sold my Princess to create some funds to go in a different direction with my system, and bought a Wireworld PE7 in the meantime. I won't give my comparison on the cables but I will say I would consider the Princess and PE7 to be direct competitors, but I remain of the opinion that nothing else except Silver/Gold conductors can reach that nth degree of resolution while retaining almost as much musicality as the very best can produce, one of them being Kondo SPz. Interestingly I have tried a Siltech SQ-28 Mkll with Kondo KSL-SPz, this combination seemed to add resolution to the Kondo while enhacing the musicality overall. That said I aim to purchase another Princess in the near future and plan to add Prince speaker cable later, when the £s permit :) keeping the loom the same should reap greater results than the sum of the parts, even if it may be tempting to try Kondo's new heavier guage SPz.
I've read nothing but great things about the Wireworld cables, especially the Silver & Platinum Eclipse speaker cables and interconnects. The Princess price is a bit more than Platinum interconnects especially as you increase length while the Platinum speaker cables price wise fall really close to the King rather than the Prince. The Plats are around $1k US more MSRP than the King for 2 meters. So I can definitely see where these models would all be in competition with each other. The Plat speaker cables are noticeably larger than their siblings due to the larger 9 AWG wire. They look like monsters from the pics I have seen, really thick which is cool.

Of course in the Wireworld lineup the Plats are all she wrote while in the Siltech line up they just keep going upwards beyond Princess for interconnects and King for speaker cables.