Review: Luxman PD-284 Turntable


Category: Analog

It’s true that, in general, belt drive yields better sound quality than direct drive. But it’s equally true that not all direct drive turntables are bad. Direct drive got a bad rap thanks in large part to all the cheap plastic junk foisted upon unsuspecting audio buyers in the late 1970s and early 1980s.

Not everyone took that cut-rate approach. Technics could usually be counted on to deliver a quality table, if not a great tonearm. Kenwood made a number of good direct drive models that were often coupled with SME tonearms to surprising effect. And of course, Denon built -- and still builds -- gorgeous turntables of mid-fi quality. My DP-47F was worth every penny of its $650 price, and I wish I still had it today.

Then there’s Luxman. During vinyl’s heyday, the company marketed products ranging from entry-level hi-fi receivers to expensive, uncompromising tube and hybrid separates. Luxman tables had vacuum hold-down on some models, and many came armless, to be fitted most often with Grace and SME arms. But even the lowliest models offered above-average performance and style.

Case in point: my PD284 from 1985. It’s lightweight but well built. The arm is delicate but confidence inspiring. Arm height is not adjustable, but azimuth is. The platter is deep and heavy and topped with a thick rubber mat. All in all, it’s a great looking piece that promises an above-average listening experience.

And it delivers. The PD284 makes a full-bodied presentation with relatively deep bass using a wide range of budget cartridges. Timing is good, and while it’s not exactly a ‘pacy’ deck like a Rega or Linn, it doesn’t have the dull, one-dimensional sound of a mass-market, plastic piece o’ crap.

It’s also not grating. Many direct drive units tend to exaggerate tics, pops and scratches. The Luxman doesn’t. It’s easy to concentrate on the music, even using a fairly modest cartridge like the Grado Prestige Black (though I got the best results with high-output moving coils).

There’s really nothing modern to compare the Luxman to, except maybe the latest version of Techincs’ venerable SL1200. The new Denon DP-500M, at around $700, is probably the closest match (manual start, big platter, nice cosmetics—just like the Luxman) but I haven’t yet heard it. According to my dealer, they’re selling like hotcakes.

The closest I can get is my Denon DP-47F. Going by memory, it offered a leaner sound than the Luxman but more detail, whether paired with a Grado Prestige Green, Benz Micro MC20E2 or Audio-Technica 440ML. Considering the price difference, though—$650 for the Denon versus $390 for the Luxman if you adjust its original price for inflation—that’s about what you’d expect.

But I vastly prefer the Luxman to something like the Music Hall MMF-2.1. Though they’re worlds apart philosophically, a used Luxman makes a nice alterantive to a $299 Music Hall. Again going by memory, I found the Music Hall sounded a bit ‘canned’ due in part to its Goldring Elan cartridge. But find a clean Luxman, add a $100 Audio-Technica 440ML, and I can about guarantee that the result will at least equal the performance of an MMF-2.1, or more likely, exceed it by a good margin.

If you’re in the market for a Luxman, I can offer the following advice:

#1: Check the tonearm wiring carefully and look over the cartridge clips. The wiring in my tonearm is very delicate and the connections at the cartridge end can get a bit tenuous. I re-terminated mine with Cardas clips not long ago and the connection -- as well as the sound -- is much improved.

#2: Check to see the auto lift-up works. If it doesn’t, be sure it’s not disengaged. There’s a little switch on the underside that allows you to turn it off if it offends. This is an electronic turntable, and as such, it’s not easy to fix. (The auto lift uses an optical sensor that triggers the actual mechanism.) On the other hand, a broken auto lift mechanism could mean a nice discount on an otherwise perfect ‘table.

#3: Check for speed accuracy and stability using the built-in strobe. It’s accurate enough.

#4: Remember that the arm’s damped cueing is not as silky as that of a Rega, so be careful the first few times you set down the stylus until you get the hang of it.

That’s about all. In general, I’ve found the Luxman PD-284 to be simple to setup, easy to enjoy and dead reliable. If you can find one, my advice is to pick it up because, unless you absolutely NEED the pace, rhythm and attack of a Rega, Thorens or Linn, a nicely preserved Luxman will give you years of fuss-free, laid-back musical enjoyment.

Associated gear
Denon DRA-395 stereo receiver with MM phono section
Rega P2 turntable (with P3 glass platter and None-Felt mat)
Luxman PD-284 turntable
Thorens TD115 turntable
Denon DL-160 moving coil cartridge
Grado Black moving iron cartridge
Stanton 500E MkII cartridge
Pioneer DV-563A universal disc player
Philips CDR-785 CD Recorder
ProAc Tablette 2000 loudspeakers
Radio Shack MegaCable 16-gauge speaker wire (bi-wired)
Various Kimber, Audioquest and MonsterCable interconnects
MonsterPower HTS2500 Power Center
AudioQuest MC cartridge demagnetizer
Record Doctor II record cleaning machine
Sennheiser HD580 Precision headphones
Sony ProAudio MDR-7506 studio monitor headphones
Grado 15’ headphone extension cable

Similar products
Denon DP-47F
Dual CS-505
Linn Axis/Basik Plus
Music Hall MMF-2.1
Music Hall MMF-5
Rega P2
Thorens TD-115
ekobesky
If you can't adjust it using the knob next to the pitch readout, the knob is either broken or the unit is far out of spec. In that case, you'll need to crack it open. You may be able to find a service manual at www.vinylengine.com with the procedure for bringing it back to spec.
I have a PD-264 with a Shure X97e cartridge. While I found the deck in original conditon to be "OK" the following simple tweaks will bring it to another level that must be heard to believe.

First I covered the entire underside of the platter with self adhesiive
shingle roll found for under ten dollars at Lowes. It is somewhat messy and tedious to cut and fit but if you note how the platter rings when you tap on it, you will understand why it must be dampened.
Next I bought 3 gabon ball/flarge footers from Herbies Audio Lab. I also highly recommend his mat which I have placed on top of the stock rubber one.

Try these simple and inexpensive mods, you will not believe the difference!
Hi there, another comment from sunny Australia. Have just dug out my Luxman PD-284 after 7 years of storage in a North QLD garage. Guess what? - It still plays! Am working on replacing the cartridge (any advice re' replacement Supex styli?) and would like to clean the tone arm which is displaying some corrosion 'spots'. Any advice? Thanks for the site.
See my article in Positive Feedback on refurbishing a vintage turntable...

http://www.positive-feedback.com/Issue18/turntables.htm
Hi, I have PD 284 since the end of the 80's. I like it so much and listen some times vinyls with a lot of pleasure.I use it finaly with an Ortofon OM 20 cartridge (I trie it with several models and products, according to me this one is a good choise).
I would be pleased if you can give to me your opinion. Sorry for my language but I've not practiced the english language since a long time