2. speakers
  3. 155032-131752

Revel F328Be's Have Arrived! / Contradicting Specs?

Well I'm only about 8 hours in with my new Revel F328Be's & I am enjoying them & they are flat out awesome. They are replacing a pair of KEF R11's in my main system which I will be moving to another system as I still think the R11's are fantastic performers. That said, the new F328Be is in another league right out of the box. More finesse, more muscle, more detail than the R11 which I think will even widen as the Revel's continue to break in. And I wish we could post pictures here because I was floored by how they arrived...they come in a heavy duty flight road case, one for each speaker with custom lettering outlining the Revel F328Be. Each case & speaker weighs over 200lbs so when the 19 year old delivery service kid showed up with no dolly, ramp or even a box cutter to unwrap the cases I knew I would be helping to get these in the house.
On a side note, I know these speakers are brand new but Revel does appear to have some contradicting specs that has left me wondering what the true specs are? For example...
-The Revel site has not yet published the frequency range for the F328 so I asked several dealers & they both came back & said the Revel rep said 26Hz - 40khz at -6db. However the manual that came with the speakers states 32Hz - 40khz at -6db? Per the manual it also states the low-frequency extension is 25Hz (-10db); 32Hz (-6db); 44Hz (-3db)
-There is also a discrepancy with the weight of the speaker...the site says 90 lbs. but the manual lists each speaker at 112 lbs which I find much more accurate after moving them around yesterday.
-The speaker dimensions are also off between the site & the manual...the Revel site lists it as 13.5" wide & the manual states 11.83". And depth on the site is listed at 17.6" while the manual states 16.56". (both the site & the manual list these measurements with grille included).
Just thought I would get this info out so you can keep it in mind if you are considering the F328Be. I want to also publicly thank Jay O'Hanlon from XTend Technologies in Cleveland for his outstanding service & assistance, I would highly recommend Jay & XTend. Thanks
spookyfoot
vavan
14 posts
 
manufacturers can make specs say whatever they want
given their scientific approach I hardly believe revel make up their specs
spookyfoot OP
18 posts
 
The Revel site just updated the specs for the F328Be...
Frequency response: 26Hz - 40kHz (-6dB)
Low-frequency extension: 24Hz (-10dB); 26Hz (-6dB); 35Hz (-3dB)

Again, doesn’t jive with the manual specs but I’m betting these are the accurate numbers vs the manual for a speaker of this size. I’m about 2 weeks in & listen to them about 4 hours a day & I am absolutely loving them. Pure muscle & punishing authority while also revealing the smallest little detail in recordings. They dig so deep with bass that my large room (26’x17’ with 22’ sloped ceiling) feels like there are multiple subs in here. And the beryllium tweeter is so smooth & handling every challenging recording I’ve thrown at it without effort. I don’t know how else to explain it but they are truly special.
hueandeye
6 posts
 
Any specs for bass will be dependent on your room and how and where you place the speakers. My Revel Ultima Studio's go down to 23Hz in my room as measured by my Velodyne SMS, and REW using a calibrated mic.
Moreover 8 hours isn't enough break-in to hear how the speaker will ultimately sound - I find it requires about 100 hours for all the drivers to break-in, especially the woofers. I found my Revel's to add about 5 Hz when fully broken-in
hueandeye
6 posts
 
dznutz  said" Revel has always been a seriously disjointed company. In not surprised about these discrepancies."
I guess that is why all their speakers are rated so highly and sound as good as speakers costing much much much more. I'll put my Revel Ultima Studios up against Wilsons any day of the week!!!!!!!!!!!!!
We should all be so 'disjointed'!!!!!!!!!!
Post removed 
More to discover