RCA vs optical cable?

I would suggest trying a regular analog RCA to hear what it sounds like first before purchasing a digital RCA. If you like what you hear, great, if not, demo some different digital cables.

I am using an analog RCA from my SBT to my Audio Note 2.1 DAC and it sounds great to me and that is really all that matters. Right?

People are always asking if this can be done or what will this sound like if I do this, etc. I like to experiment with different set ups. In my opinion, an individual is in the wrong hobby and is lazy if they don't want to hear what different configurations sound like. It takes a lot of time and effort to experiment with what one is hearing.

Depending on many system-dependent variables, intentionally introducing what will probably be a significant impedance mismatch by using an analog interconnect to conduct a digital signal might in some cases, by happenstance, produce good results. In past threads here several members have in fact reported good results doing that.

However IMO it is poor practice, and if the results are sonically pleasing chances are that what is happening (at least in situations where the DAC does not provide jitter rejection that is near perfect, such as by means of ASRC technology) is that the mismatch is resulting in the introduction of jitter that happens to be euphonic in the particular system. From this paper by Steve Nugent of Empirical Audio:

Another interesting thing about audibility of jitter is it's ability to mask other sibilance in a system. Sometimes, when the jitter is reduced in a system, other component sibilance is now obvious and even more objectionable than the original jitter was. Removing the jitter is the right thing to do however, and then replace the objectionable component. The end result will be much more enjoyable.

Jitter can even be euphonic in nature if it has the right frequency content. Some audiophiles like the effect of even-order harmonics in tubes, and like tubes, jitter distortion can in some systems "smooth" vocals. Again, the right thing to do is reduce the jitter and replace the objectionable components. It is fairly easy to become convinced that reducing jitter is not necessarily a positive step, however this is definitely going down the garden path and will ultimately limit your achievement of audio nirvana.

Regards,
-- Al

"Jitter can even be euphonic in nature if it has the right frequency content. " This is beyond my jargonistic experience and may be "jitterish b.s."

04-09-12: Ribit
"Jitter can even be euphonic in nature if it has the right frequency content. " This is beyond my jargonistic experience and may be "jitterish b.s."

The statement is not b.s. in any way, although it may sound like it is to someone who does not have relevant technical background.

Also, the paper from which the statement is quoted, which I linked to above, IMO provides some very good background on the subject of jitter.

Disclaimer: I have no affiliation with the author of the paper or his products, not even as a user.

Regards,
-- Al

someone dares to disrespect almarg? does he not fear the wrath of the audio gods?