PS Audio P3 power Plant


I like to know if I can connect to P3 power plant ( ps audio) my pass lab power amp XA 30.5? I also need to connect other gears to it like CD player and Pre Amp to same P3 . XA 30.5 takes max 200 watts , whereas CD player and preamp put together will take no more than 200 watts . P3 gives 750 watts , so that appears to be safe. But my can I connect power amp and CD player+ preamp to one same P3 power plant ? Or do I need separate conditioner for power amp XA30.5 ?
Besides this , can you suggest if ps audio P3 is the right choice for my application ? Or do I consider to buy some other power conditioner ?
Your suggestions , comments are welcome .
radni
Elizabeth,
I live in India and power quality that we get from Company is quite bad. In that case I thought, would a Regenerated power from PS Audio P3 not be a better supply got my Amp ? I am ready to live with higher energy consumption or temp rise for that matter. But at least my Amp will get pure sine wave power !
Post removed 
The P3 has two 'high current' outlets that are filtered and surge protected but draw their juice from the house AC - they do not draw power from the regeneration part of the P3. The 750 AV limit of the P3 is not affected by anything plugged into those two outlets. There is plenty of power for all the front-end pieces you want and it looks like your amp as well.

If you want to be sure, go to their site and find the email address for their sales dept (under Contact Us). I sent them some questions and they answered within an hour or so.
I picked up a used PS Audio Premier Power Plant for my system. I plug everything into it except my power amps, JC1 Halos. They plug right into dedicated lines, and the factory says to run them this way. The odd thing for me was the need to run my phono preamp, JC3, into the wall as well, and with the ground lifted. Everything is silent and the improvements in dynamics and image have made me feel these power regenerators are a fundamental part of a serious system. In fact, I bought a second and use it for my home theater. The plasma TV looks much better, and the surround sound system is much more vivid. PS Audio has a big listening room with four dedicated lines and their top regenerators on each one! Must be nice to play at that level!
I agree with Oldtex, your gear is well under the maximum rating of the P3, Class-A or not. And I believe the newer PS Audio regenerators are more efficient than the older models like Elizabeth has. But if there is any question by all means contact PS Audio directly and they will give you a prompt answer.