Preamplifier options - seeking help to determine which one

I owned and loved a Yamamoto A011 (VT52) amp for nearly 9 years.

Thank you for your reply. I appreciate your experience and reflections regarding Yamamoto and I'm glad that you take my system (Audio Note) into consideration.

I was actually recommended, by Yamamoto, to choose A-011 due to the low stock of VT-52 and ADM-1 tubes. The A-011 is supposed to be made with 2A3 making a fair 4 W per channel.

 I did get a very quiet sound out of a pair of AN Es which are nearer 92db rather than 98db. 

I'm very well aware that both the "45" and "VT-52" amplifiers deliver modest power. The Audio Note speaker I would like is the SPe/HE that should be 98 dB efficient. I will listen to music in a 25 square meter room. I have tried various places to ask if it would be a problem. Most replies I get is that the "45" will probably be difficult, but the "VT-52" shouldn't be. Which pair of Js do you have? 

to stop loud clicking noises caused by dc on the attenuator burning the contacts

This seems like a major problem. Can you elaborate on the problem and how did it occur? 

Hello again, Firstly apologies for the mix up. I quoted the wrong model No from memory! I owned a Yamamoto A010, the VT42 SET amp, not the A011, 2A3 amp. I bought the A010 without the VT52 power valves. I asked for 8 ohm and 16 ohm speaker taps but Shigeki Yamamoto Insisted that I had to choose one or the other! However, the amp arrived with both 8 ohm AND 16 ohm taps! Shigeki also supplied the amp with 4 NOS 'coke bottle' Hytron 80 rectifiers and two Siemens C3M input tubes. A valve/tube pal had a large stash of VT52s, I bought 2 pairs of NIB Hytron 1943 vintage VT52s. I bought another two pairs of NIB Sylvania VT52s off a US seller and two pairs of Tungsol VT52s off another US seller. I sold the A010 with a pair of lightly used Sylvania VT52s and Hytron VT52s. I still have the other unused pairs of VT52s, so 4 pairs in total. Did you know that the A010 will also happily use 6A3 tubes in stead of the VT52? These are what I mainly used as they give a bit more power and are really nice sounding valves (a bit easier to get hold of too) The A010 uses constant current heaters so the 6A3 heaters run at about 6,5V which is fine. you get about 55mA on the meter instead of about 43mA, with VT52s. I had a pair of the cheaper ANJs and had a pair of KIT 3 ANEs. AN rate the dearer ANEs at 98db but reviewers warn that they are nearer 93/94 db. If you stick with Yamamoto I would be tempted to get the KT88 A03 12w SEP amp? The tubes are alot easier to get and it would be a better match, power wise. Another valve amp that I think works really well with ANEs is the smallest Leben EL84 intergrated amp. Also try and hear Audio Notes own EL84 and EL34 push/pull amps.

Hello again.

It seems like you received great service and that you have an excellent selection of exquisite tubes.

How did you land upon Yamamoto? What do you think of the sound?

I don’t think AN OTO can battle with Yamamoto SET designs. I’m not sure though. 
 

I don’t know much about KT88 either but I really like 45. I thought VT52 would be perfect with SPe/He. How come there is so big variation in efficiency? 

Hi again, A friend of mine Is/was a Yamamoto dealer and loaned me an older A08 45 SET amp to try. I loved it but thought that it struggled a bit, dynamically, on large Orchestral climaxes, with my 100db Lowther 'Fidelios'. Because I had a pal with a supply of VT52s, I went for the A010 instead. I should also mention that I listened to a Yamamoto A09s (300B) set amp with 94db Living Voice speakers and Lowthers. Very nice sound with on the LV speakers so I Imagine the A09s would be great with the ANEs. I preferred the A010 on the 100db Lowthers because it sounded 'faster' and cleaner, but the A09s was definitely the better sounding amp on the 94db LV speakers IMHO. The less expensive A014, 300B set amp, would have been a more affordable option, too. Not sure If Yamamoto still make them? My local Yamamoto dealer has been unable to get much out of Mr Yamamoto since Covid. He seems to think that Yamamoto were only selling the amps In Japan now? Not sure if this is still the case.

The CA03 phono pre amp has alot of gain and almost too much for the amps, depending on your speakers. I think Yamamoto do a stand alone phono stage without a volume control or line inputs This might be a good option with one of Yamamoto's passive volume controls? Again, depending on your speaker sensitivity.

Sound wise, the CA03 phono stage is lovely but very slightly 'coloured' in a slightly old-fashioned way? So, warmish/full bass, gorgeous midrange and 'golden hued' treble. The SET amps are more neutral sounding. Both the A09s and A08s are a bit warmer in the bass. The A010 is more 'modern' sounding with tight but powerful bass and very 'open' midrange and treble. Using 6A3 tubes gives a slightly warmer presentation and also a bit more 'dynamic' You'd use 6A3s for pop/rock, and VT52 s for jazz/classical. Don't bother with WE VT52s even if you can afford them! WE never made any VT52s but had them made for them by other valve makers. The Hytron VT52s give a lighter / cleaner more 'modern' sound. The Sylvania VT52s give a slightly fuller/warmer sound (lovely).