Phono setting and MC/MM

I strongly doubt the receiver is switchable to MC.  He will probably need a separate "head amp" (phono pre-preamp).  I would guess old head amps are available used for $50-$100.

Probably an older Mac, they would do MM, MC or MI. 3.5mv or better would work, load the MC cart correctly and away you go.
No your receiver is a MM cart.

The MC cart you have unless it's like a 5mv or higher. High output MC 

Look up the model number on the cart and see what the specs are. Google works great OP without a name and model. They are all different..

Thanks for all the replies.

He is looking to pick up a pioneer sx780.

The cartridge is a Japanese name (I don't have the box in front of me).  Pic below.

https://ibb.co/3rfDXTK

Looks like we will hook it up and see if we need that head amp.

Pioneer specs

Specifications

Tuning range: FM, MW

Power output: 45 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 80kHz

Total harmonic distortion: 0.05%

Damping factor: 30

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 76dB (MM), 95dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 5 x FWT, 11 x IC, 26 x transistors, 22 x diodes

Dimensions: 480 x 140 x 320mm

Weight: 11.2kg

@sdaudiophile69

The cartridge is a Hana SL low output and the Pioneer is absolutely not compatible for cartridges MC.

Ok, thanks!