Pairing with Vienna Acoustics Hadyn Grand&Rel B3?

JRDG class D amps, and I believe also Bel Canto amps are very much grounded. In fact, users manuals require use of grounded power cords, lest you void the warranty.

I have heard several times the JRDG 312 class D amp connected to a Rel subwoofer, and there was no problem. The system was as quieit as a hybernating mouse. Soundings Hifi Of Denver Colorado routinely features JRDG class D amps matched to Rel subs. 312 is grounded, balanced in the output phases, and transformer coupled for full output isolation.

Never the less, I have heard also of humming problems with some amps.

Here is what the JRDG Model 102 and 201 manual has to say on the subject:

"WARNING: Both positive and negative outputs

are electrically active with respect to chassis
and/or system ground potential. Therefore, this
amplifier cannot be used in certain loudspeaker
switching configurations, such as those used in retail
demonstrations. Failure to avoid these precautions
may short the outputs to ground and can result in
damage to the amplifier and will void the warranty.

Certain subwoofer speakers which derive signals from
amplifier outputs will require additional circuitry to
properly isolate the amplifier output. Please contact
JRDG before connecting these types of subwoofers."

I do not recall if Bel canto amps are also balanced in the output phases and have potential probs with some subwoofers. . . I will check with the factory and will let you know.

The matter of compatibility of class D amps with subs is not set in concrete and depends on individual amps and individual subs. You may need to ask questions specific to a particular sub to the manufacturer of the amp you are interested in.

The difference in price between the Bel canto M300S and the Reference monoblock series is not so much a matter of power output, but of refinement of design and implementation. Bel Canto makes amazing products at great prices. The price difference among their products is a factor of wht these devices offer to the user.
G.

I had an excellent conversation with Matthew at Bel Canto. He explained to me that:

Bel Canto 500 series amplifiers, both Ref 500S and Ref 500M can be connected directly to a Rel subwoofer, because they have only 1 active speaker lead, as if they were old style class A or A/B amps, while the 2nd lead is referenced to ground, which is what the Rel sub expects.

Ref 1000m, and all 300 series amps, have 2 live speaker leads, and if connected to a Rel, they are likely to damage themselves or to damage the sub.

He added that the easiest, simplest, and likely most sonically compelling solution is not to connect power amps to a subwoofer at all, but to connect a line level output from the pre to the sub instead, regardless of what type of amp you use.

Guido

Guido - I appreciate all your dilegence.

Interestingly enough, REL in their manuals suggest that the optimal way to connect to their SUBS is to the speaker terminals:
"It is helpful to know that you will almost always connect the REL to the input on the
rear panel labelled “HIGH LEVEL.” This connection is made using the supplied 34’
10” (10 meters) cable, the bare leads of which connect to the speaker output
terminals of the power amplifier. The easy and foolproof connection at the REL is
done with a Neutrik Speakon connector. The purpose of connecting to the speaker
output terminals is one of the unique secrets of REL’s success. By connecting to the
high level input on the REL from the amplifier, you build forward the sonic signature of
your main system, including the tonal balance and timing cues of the entire
electronics chain. In this way, the REL is fed the exact signal that is fed to the main
speakers."

As I wade deeper into the audiophile pool the water gets more murky :)

Thanks!

Yes, I am aware of that. The suggestion of connecting the Rel to the pre comes from Bel Canto. If you prefer to connect your Rel to the amp I suggest you go with Bel canto ;500 series, either mono or stereo. On Monday I'll investigate further with Soundings Hifi in Denver. They have a lot of experience connecting Rel subs to JRDG class D amps, which are of the balanced output variety like the Bel Canto 300 and 1000 series.

GUido

Apparently REL offers a 'digital Cable' whose purpose in life is to let one connect REL active subwoofers directly to amplifiers that have totally balanced outputs. . . that is active positive and negative leads. This cable has little circuit buried in epoxie, and a supplementary ground wire terminated with an RCA connector, which is to be connected to an RCA output of the preamplifier in the system.

The 'digital cable' makes REL woofers compatible with every current JRDG class D model, except for Model 102, possibly because 102 is not transformer coupled in the outputs. The compatibility of the REL 'digital cable' with Bel Canto 300 and 1000 series amps should be investigated with Bel Canto tech support at 612-317-4550, x.200.

For more information about the REL digital cable please call Sumiko Audio at: 510-843-4500