New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
kantx ...

That’s why I asked if you were using tubes or SS.

I had the same problem with the first incarnation of TC after I did the tube pins. The problem was with one tube in the line stage. I tried everything to solve the problem. I had extra tubes and selected a good one, then did as Geoff suggested and only pasted about half way up the pins. That solved the problem. No problems since and that was two years ago. All of my tube pins are pasted throughout the system at this point and the sound is wonderful.

Frank
This Total contact is amazing! I didn’t know how how far a tube would go , so I bought way too many! I think I have six extra kits! If you know anyone who needs one or two, I’m selling them at a discount. I used it on power cords, speaker cables and inter connects with incredible results.you can email me at macez101@aol.com

@oregonpapa
Maybe so. I did a thorough cleaning of GE 12AU7 which are the signal tubes on my amp. Finally, cleaning with alcohol, wiping carefully with Q-tips and brushing with a soft metal brush, but also cleaning with small dental brush inside the tubes sockets, finally I got rid of this crackling. I don’t know if I will apply TC again on it. I really wanted to be able to use these GE tubes again, vastly superior to the OEM Electro Harmonix Gold, so now that they are fine again I’m not sure to re-dux the whole process. I don't get exactly what went wrong, since the second time I applied TC on the first 1/4-th of the pins length.
No prob with KT120 power tubes though. Had first a return from Tim Mrock, then no words from him.